WOMOS 140L Air and Missile Defense (AMD) Systems Technician

WOMOS Description

Air and Missile Defense (AMD) Systems Support Technician, serves as a Subject Matter Expert (SME) on the employment and operations for the Air & Missile Defense (AMD) systems as an AMD System Support Technician. Plans and supervises the maintenance and logistical requirements/activities within an AMD unit. Monitors the AMD system and related support equipment to prevent, detect, diagnose or repair operator error and/or system malfunctions. Serves to coach, teach, mentor and evaluate Soldiers in AMD system on maintenance procedures. Evaluates the effectiveness of battery, battalion and brigade maintenance programs. Manages the use and care of special tools and support equipment, oversees the utilization of The Army Maintenance Management System (TAMMS). Monitors and coordinates the installation of modifications to the AMD system. Implements proper safety and security procedures applicable to the operation and maintenance support of the AMD system. Advises the commander on all AMD technical considerations at all levels. For more information on WOMOS 140L, see this Army website.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Top
This is an official U.S. Army websiteUpdated: October 30, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) is an entry-level certification for technicians who have less than two years of experience or training in electronics. Associate Electronics Technicians demonstrate knowledge of basic electronic theory and applications used in all electronic disciplines including circuits, test equipment, electrical theory, work procedures and telecommunications fundamentals. The CETa is the foundation for ETA’s journeyman, senior, and master specialty, and master certification programs. CETa applicants must meet the experience or training requirement and pass a written exam. An optional practical exam is offered.
Click here to go to Fiber Optics Installer (FOI) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Fiber Optic Installers (FOI) certification is for fiber optic technicians. FOIs demonstrate a general understanding of optical fiber installation, connectors, splice performance characteristics, and testing optical fibers. In addition, FOIs are proficient in the installation of connectors on various types of fiber optic cables using multiple types of connectors and can perform mechanical and fusion splicing. Candidates are required to pass both a written exam and a Hands-On Skills Test.

Click here to go to Telecommunications Electronics Technician (TCM) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Telecommunications Electronics Technician (TCM) is an intermediate-level technician credential for professionals who work in the telecommunications field. TCMs demonstate knowledge of wired and wireless communications basic concepts, applicable to various types of voice, data and video systems. TCM must have knowledge in Cables and Cabling, Analog Telephony, Equipment, Telecom Safety and Mathematics, Transmission Service Providers and Protocols, Distribution Methods, Computer, Digital Telephony, Interfacing, Internet, Network Infrastructures and Topologies, Office Wiring, Wireless Telephony, Test Equipment, Optical Wiring, and Troubleshooting. Candidates must pass a written exam. Candidates that hold a Standalone TCM and later complete the Associate CET (CETa), are eligible to upgrade to a Journeyman CET.
Click here to go to General Radiotelephone Operator License (PG) COOL Snapshot page.

Renewal Period: Lifetime

The Federal Communications Commission (FCC), General Radiotelephone Operator License (PG) is an intermediate-level technician license. A PG is required to adjust, maintain, or internally repair FCC licensed radiotelephone transmitters in the aviation, maritime, and international fixed public radio services. A PG is also required to operate: any compulsory equipped ship radiotelephone station operating with more than 1500 watts of peak envelope power; and voluntarily equipped ship and aeronautical (including aircraft) stations with more than 1000 watts of peak envelope power. FCC requires candidates to be a legal resident of the United States and be fluent in the English language. Candidates must pass a written exam.
Click here to go to Computer Service Technician (CST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Computer Service Technician (CST) credential is for professionals who service hardware and provide systems software skills for personal computers. CSTs demonstrate knowledge in areas including, computer assembly/disassembly, motherboards, processor characteristics, system resources, buses, ports, peripheral devices, physical and electronic memory characteristics, secondary storage devices, and power concepts and supplies. Candidates must pass a written exam.
Click here to go to RADAR Electronics Technician (RAD) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), RADAR Electronics Technician (RAD) is a journeyman-level certification recommended for radar electronics technicians with knowledge of radar basics and concepts applicable to all types of avionics, maritime and land systems. RADAR Electronics Technicians must be knowledgeable and have abilities in technical and human relations areas including, Block Diagrams and Schematics, Components, Cabling and Antennas, Hand Tools & Soldering, Mathematics, Amplifiers, RADAR Transceivers, Interfacing, Satellite, Wireless, and Data Communications, Computers and Digital Concepts, Software Programming, Troubleshooting, and People Relations. Candidates must hold the Associate Electronics Technician (CETa) certification prior to taking the RADAR exam. Individuals with a valid FCC Element 8, and either the ETA Associate CET (CETa) or a Journeyman (CET) certification, are eligible for a rollover to an ETA RADAR certification. Candidates must pass a written exam.
Click here to go to Section 608 Technician Certification (Universal) COOL Snapshot page.

Renewal Period: Lifetime

The Environmental Protection Agency (EPA), DOD/EPA Section 608 Technician Certification (Universal) is a requirement under EPA regulations 40 CFR Part 82, Subpart F, under Section 608 of the Clean Air Act. This regulation requires that technicians who maintain, service, repair, or dispose of equipment that could release ODS refrigerants into the atmosphere must be certified. Technicians that service all types of equipment should be certified as a Universal Technician. Technicians are required to pass an EPA-approved exam to earn Section 608 Technician Certification. Exams must be administered by an EPA-approved certifying organization. There are no eligibility requirements to sit for the exam, but training is available through EPA-approved certifying organizations.
Click here to go to Network Systems Technician (NST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Network Systems Technician (NST) certification is for a network professional who has knowledge of computer network basic concepts, which are applicable to all the various specialty areas of the computer industry. The NST demonstrates knowledge domains includeing, Computer Network Terminology, Network Administration, Wide Area Networks and Devices Used to Extend Networks, Network Architectures, Computer Network Topologies and Classifications, Network Services, Network Operations, and Network Standards. Candidates must pass a written exam.
Click here to go to Fiber Optics Technician (FOT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Fiber Optics Technician (FOT) certification is for the fiber optics professional with an understanding of concepts of fiber optics servicing, troubleshooting, and repairing. FOTs demonstrate knowledge of fiber optic transmissions, cables principal of light, optical fiber characteristics, optical fiber construction and theory, safety and other related topics. The ETA-I Fiber Optics Installer (FOI) certification is a pre-requisite for this certification. Candidates must pass a written exam and a hands-on skills test.
Click here to go to Senior Certified Electronics Technician (CETsr) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Senior Certified Electronics Technician (CETsr) is an advanced level certification intended for, but not limited to, the professional electronics service technicians, technician managers, consultants, and electronics educators who have been active in the industry for six or more years. CETsr candidates must pass a written exam which includes the Associate level exam, plus one of the specialized Journeyman options.
Click here to go to Certified Electronics Technician - Associate-Level (Associate CET) COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level (Associate CET), is an entry-level certification for technicians and students with under four years of experience and validates the technician’s knowledge of basic electronics, including math, DC and AC circuts, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Communications COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians, Certified Electronics Technician - Journeyman-Level - Communications credential is for technicians working in the electronics field. Candidates must demonstrate knowledge of two-way transceivers and how to service them. Candidates also must understand communication theory, transmitters, deviation, sensitivity, quieting, and troubleshooting. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Computer COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians, Certified Electronics Technician - Journeyman-Level - Computers credential is for technicians working in the field of electronics. Candidates must demonstrate an understanding of computer systems and hardware and must show proficiency in basic arithmetic and logic operations as they relate to computer theory, computer organization, memory and storage, and input and output equipment. The technician should have some knowledge of software and programming, and be able to explain troubleshooting procedures. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Radar COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician -Journeyman-Level – Radar credential validates the technician’s general knowledge of both continuous wave and pulse radar operation. Candidates must know about transmitters and receivers, antennas, transmission lines and their characteristics and CRT display systems and their power supplies. Candidates must pass a written exam.
Click here to go to Certified Mapping Scientist, GIS/LIS (ASPRS) COOL Snapshot page.

Renewal Period: 5 years

The Imaging & Geospatial Information Society (ASPRS), Certified Mapping Scientist, GIS/LIS certification is for professionals involved in GIS/LIS systems design and/or systems application of data base management and computer programs to solve user analysis requirements with spatially referenced databases. The Certified Mapping Scientist GIS/LIS leads the data needs integration and the correspondence between and the utilization of various spatial systems used to solve requirements. Candidates must meet experience requirements and must pass a written exam.

Click here to go to Certified Mapping Scientist, Remote Sensing (ASPRS) COOL Snapshot page.

Renewal Period: 5 years

The Imaging & Geospatial Information Society (ASPRS), Certified Mapping Scientist, Remote Sensing is for professionals who use visual or computer-assisted technology to analyze images acquired from aircraft, satellites, ground bases, or platforms. These analyses are used in the study of temporal changes, natural resources, and for land use planning. Candidates must meet experience requirements and must pass a written exam.

Click here to go to Registered Communications Distribution Designer (RCDD) COOL Snapshot page.

Renewal Period: 3 years

The BICSI, Registered Communications Distribution Designer (RCDD) credential is aimed at Information and Communications Technology (ICT) industry professionals. RCDDs are knowledgeable about creation, planning, integration, execution and/or detailed-oriented project management of data communications and telecommunications technology. Candidates must pass a written exam.
Click here to go to Certified Control Systems Technician - Level I (CCST-I) COOL Snapshot page.

Renewal Period: 3 years

The International Society of Automation (ISA), Certified Control Systems Technician – Level I (CCST-I) credential offers third-party recognition of a technician's knowledge and skills in automation and control. CCSTs understand process control looks and process control systems, including computer systems. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, depending on the level of experience, training and education, with Level I being the most basic. Candidates must meet a combination of education and experience. Candidates must pass a written exam.
Click here to go to Commercial Driver's License (CDL) COOL Snapshot page.

The United States Department of Transportation, Federal Motor Carrier Safety Administration (FMCSA), Commercial Driver's License (CDL) is for individuals who drive certain Commercial Motor Vehicles (CMVs). There are three classes of CDLs with endorsements for specialized qualifications for vehicles like school buses, tank trucks, and tractor trailers. The U.S. Department of Transportation requires drivers to obtain and hold a CDL if they operate in interstate, intrastate, or foreign commerce and drive a vehicle that meets one or more of the classifications of a CMV described on the FMSCA website. FMSCA has developed and issued standards for state testing and licensing of CDL holders. These standards require state governments to issue CDLs to certain CMV drivers only after the driver passes knowledge and skills testing that is administered by the state and related to the type of vehicle the driver expects to operate.
Click here to go to Associate Engineering Technologist (AT) COOL Snapshot page.

The Associate Engineering Technologist (AT) certification is intended for individuals who have graduated from an engineering technology bachelor's degree program accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (TAC/ABET). An engineering degree will NOT be considered as a substitute for a program from an accredited school. The Associate Engineering Technologist (AT) grade is available upon graduation, No work experience is required for certification at the AT grade.
Click here to go to Industrial Electronics Technician (IND) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Industrial Electronics Technician (IND) certification is an intermediate journeyman-level credential for electronics technicians. Candidates applying for IND certification are required to already hold the Associate Electronics Tecnician (CETa) certification and are expected to understand basic industrial electronics concepts applicable to various specialty areas of industrial electronics. IND candidates must be knowledgeable and have skills in the following areas: Amplifiers, Optical Wiring, Block Diagrams Schematics, Power Supplies, Test Equipment Tools, Mathematics, Computers Digital Concepts, Safety, Satellite Wireless Data, Communications, Cabling, Troubleshooting, Motors, Programmable Logic Controllers, and Software. Candidates must pass a written exam.
Click here to go to Certified Maintenance and Reliability Professionals (CMRP) COOL Snapshot page.

Renewal Period: 3 years

The Society for Maintenance and Reliability Professional (SMRP), Certified Maintenance and Reliability Professional (CMRP) is a certification for maintenance, reliability and physical asset management professionals. CMRP candidates should possess aptitude in the following areas: business and management, equipment reliability, manufacturing process reliability, organization and leadership, and work management. There are no experience or education eligibility requirements. Candidates must pass a written exam.
Click here to go to Avionics Electronics Technician (AVN) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Avionics Electronics Technicians (AVN) certification validates the knowledge and skills of individuals who install, maintain and adjust electronics equipment, cabling and the accessories used in aviation communications and control equipment. AVNs demonstrate an understanding of avionics systems, cabling, computers and digital concepts, amplifiers, interfacing, antennas and transmission lines components, mathematics, network topologies and infrastructures, people relations, optical cabling, safety, test equipment and tools and satellite communications. Candidates must pass a written exam.
Click here to go to Certified GIS/LIS Technologist COOL Snapshot page.

Renewal Period: 3 years

The Imaging & Geospatial Information Society (ASPRS), Certified GIS/LIS Technologist certification is designed for technicians who integrate an assortment of spatial data sets into a GIS format designed for graphic output or analysis. Although routine, the work is technical and demands a high degree of skill. Candidates must meet experience requirements. Candidates must pass a written exam following peer review and approval.

Click here to go to Medium/Heavy Truck - Gasoline Engines (T1) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Gasoline Engines (T1) certification is for individuals who possess knowledge and skills in general engine diagnosis and the diagnosis and repair of the cylinder head and valve train, engine block, lubrication and cooling systems, ignition system, fuel, air induction and exhaust systems, emissions and control systems, and computerized engine controls. Candidates must meet experience requirements and pass a written exam.
Click here to go to Medium/Heavy Truck - Diesel Engines (T2) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Diesel Engines (T2) certification is for individuals who possess knowledge and skills in engine brakes, general engine diagnosis, and the diagnosis and repair of the cylinder head, valve train, engine block, lubrication and cooling systems, air induction and exhaust systems, fuel system and starting and charging system. Candidates must meet experience requirements and pass a written exam.
Click here to go to Medium/Heavy Truck - Drive Train (T3) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Drive Train (T3) certification is for individuals who possess knowledge and skills in the diagnosis and repair of the clutch, transmission, driveshaft, universal joint, and drive axle. Candidates must meet experience requirements and pass a written exam.
Click here to go to Medium/Heavy Truck - Brakes (T4) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Brakes (T4) certification is for individuals who possess knowledge and skills in air brakes diagnosis and repair, hydraulic brakes diagnosis and repair, air and hydraulic antilock brake systems (ABS), automatic traction control (ATC), and electronic stability control systems. Candidates must meet experience requirements and pass a written exam.

Click here to go to Medium/Heavy Truck - Suspension and Steering (T5) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Suspension and Steering (T5) certification is for individuals who possess knowledge and skills in the diagnosis and repair of the steering system, suspension, frame, 5th wheel, wheels, tires, and hub and the diagnosis, adjustment, and repair of wheel alignment. Candidates must meet experience requirements and pass a written exam.
Click here to go to Medium/Heavy Truck - Electrical/Electronic Systems (T6) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Electrical/Electronic Systems (T6) certification is for individuals who possess knowledge and skills in the diagnosis and repair of the general electrical/electronic system, battery and starting system, charging system, lighting system, and related vehicle systems. Candidates must meet experience requirements and pass a written exam.
Click here to go to Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8) certification is for individuals who possess knowledge and skills in engine systems, the cab and hood, electrical/electronics, the frame and chassis, and the road/operational test. Candidates must meet experience requirements and pass a written exam.
Click here to go to Medium/Heavy Truck - Heating, Ventilation, and Air Conditioning (HVAC) Systems (T7) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Heating, Ventilation and Air Conditioning (HVAC) Systems (T7) certification is for individuals who possess knowledge and skills in the diagnosis, service and repair of HVAC systems, A/C system and components, and heating and engine cooling systems and the diagnosis and repair of operating systems and related controls. Candidates must meet experience requirements and pass a written exam.
Click here to go to Associate Safety Professional (ASP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Associate Safety Professional (ASP) certification validates an individual's knowledge and experience in the safety profession. ASP certifies an individual's ability to perform at least 50% of professional-level safety duties in safety, health, environment, and ergonomics. Safety professionals are required to make worksite assessments to determine risks, potential hazards and controls, evaluate risks and hazard control measures for equipment, systems, facilities, and processes, investigate incidents, maintain and evaluate incident and loss records, and prepare emergency response plans. ASP candidates must meet a combination of education and experience requirements. Candidates must take a written exam.
Click here to go to Certified Geographic Information Systems (GIS) Professional (GISP) COOL Snapshot page.

Renewal Period: 3 years

The GIS Certification Institute (GISCI), Certified Geographic Information Systems Professional (GISP) credential validates the knowledge and experience needed to successfully perform in the industry. GISPs use their knowledge and intellectual maturity to effectively approach problems and communicate solutions in an ethical manner. Candidates must meet a combination of education and experience requirements. Candidates must pass a written exam and must submit a portfolio of educational and professional achievements and contributions.
Click here to go to Certified Control Systems Technician - Level II (CCST-II) COOL Snapshot page.

Renewal Period: 3 years

The International Society of Automation (ISA), Certified Control Systems Technician – Level II (CCST-II) credential offers third-party recognition of a technician's knowledge and skills in automation and control. CCSTs understand process control looks and process control systems, including computer systems. CCSTs calibrate, document, troubleshoot, and repair/replace instrumentation for systems that measure and control level, temperature, pressure, flow, and other process variables. CCST certifications are available at three levels, depending on the level of experience, training and education, with Level II being the mid-level. Candidates must meet a combination of education and experience. Candidates must pass a written exam.
Click here to go to Master Medium-Heavy Vehicle Technician COOL Snapshot page.

Credential description coming soon.
Click here to go to Student Electronics Technician (SET) COOL Snapshot page.

The Electronics Technicians Association, International (ETA-I), Student Electronics Technician (SET), ETA-I’s most basic certification, is for high school and college students who want to learn basic electronic applications. Candidates must pass a written exam either through ETA or through NOCTI, an assessment provider for the SET certification.
Click here to go to Electric Vehicle Technician (EVT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electric Vehicle Technician (EVT) is an intermediate-level credential for professionals who work on vehicles powered solely by electricity and perform routine maintenance. Electric Vehicle Technicians must have extensive knowledge of how lithium-ion batteries and automotive systems interact and how to replace hydraulically assisted systems with electric–powered systems, such as power-steering pumps or air-conditioning compressors, to improve fuel economy. Though ETA-I does not require any specific training, education or experience to earn the EVT certification, candidates are strongly encouraged to have the requisite knowledge and experience necessary to challenge the exam.
Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. The EM1 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written examination.
Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate AC (EM2) credential is for technicians in the electricity and electronics field. The EM2 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written exam.
Click here to go to Electronics Associate Analog (EM3) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate Analog (EM3) is an entry-level credential designed for technicians in the electricity and electronics field. The EM3 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa).  Candidates must pass a written examination.
Click here to go to Electronics Associate Digital (EM4) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate Digital (EM4) is an entry-level credential designed for technicians in the electricity and electronics field. The EM4 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written examination.
Click here to go to Electronics Associate Comprehensive (EM5) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate Comprehensive (EM5) is an entry-level credential designed for technicians in the electricity and electronics field. The EM5 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written examination.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Bus and Truck Mechanics and Diesel Engine Specialists
Click here for the external link to: My Next Move salary info for Bus and Truck Mechanics and Diesel Engine Specialists

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Bus and Truck Mechanics and Diesel Engine Specialists

Click here for the external link to: My Next Move for Veterans - Cartographers and Photogrammetrists
Click here for the external link to: My Next Move salary info for Cartographers and Photogrammetrists

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Cartographers and Photogrammetrists

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Click here for the external link to: My Next Move for Veterans - Emergency Management Directors
Click here for the external link to: My Next Move salary info for Emergency Management Directors

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Emergency Management Directors

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Transportation and Material-Moving Machine and Vehicle Operators
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Transportation and Material-Moving Machine and Vehicle Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Transportation and Material-Moving Machine and Vehicle Operators

Click here for the external link to: My Next Move for Veterans - General and Operations Managers
Click here for the external link to: My Next Move salary info for General and Operations Managers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for General and Operations Managers

Click here for the external link to: My Next Move for Veterans - Heavy and Tractor-Trailer Truck Drivers
Click here for the external link to: My Next Move salary info for Heavy and Tractor-Trailer Truck Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Heavy and Tractor-Trailer Truck Drivers

Click here for the external link to: My Next Move for Veterans - Light Truck or Delivery Services Drivers
Click here for the external link to: My Next Move salary info for Light Truck or Delivery Services Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Light Truck or Delivery Services Drivers

Click here for the external link to: My Next Move for Veterans - Mapping Technicians
Click here for the external link to: My Next Move salary info for Mapping Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Mapping Technicians

Click here for the external link to: My Next Move for Veterans - Operating Engineers and Other Construction Equipment Operators
Click here for the external link to: My Next Move salary info for Operating Engineers and Other Construction Equipment Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Operating Engineers and Other Construction Equipment Operators

Click here for the external link to: My Next Move for Veterans - Surveyors
Click here for the external link to: My Next Move salary info for Surveyors

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Surveyors

Click here for the external link to: My Next Move for Veterans - Training and Development Specialists
Click here for the external link to: My Next Move salary info for Training and Development Specialists

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Training and Development Specialists

This credential has been accredited by:
This credential has been accredited by: