ASI U4 Power Line Distribution

ASI Description

Identifies positions requiring soldiers qualified to install, operate, and maintain power distribution systems.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Additional information pertaining to ASI U4 Power Line Distribution can be found below.

NAMO

The 249th Engineer Battalion (Prime Power) has partnered with the International Electrical Testing Association (NETA) to create NETA Accredited Military Organization(s) (NAMO), which enables 12P Soldiers to earn Level II / III / IV certifications as Electrical Testing Technicians.

Top
This is an official U.S. Army websiteUpdated: July 31, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

Promo Points

This credential has been approved for promotion points. Click for more information.   Click to go to related promotion points site.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) is designed for technicians who have less than two years of experience or training in electronics. The CETa is the foundation for ETA’s journeyman, senior, and master specialty, and master certification programs. CETa applicants must meet the experience or training requirement and pass a written exam.
Click here to go to Certified Electronics Technician - Associate-Level (Associate CET) COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level (Associate CET), is an entry-level certification for technicians and students with under four years of experience and validates the technician’s knowledge of basic electronics, including math, DC and AC circuts, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.
Click here to go to Electrical Generator Systems Technician Certification - Journeyman COOL Snapshot page.

Renewal Period: 5 years

The Electrical Generating Systems Association (EGSA), Electrical Generator Systems Technician Certification - Journeyman is an intermediate-level certification that demonstrates an individual's knowledge of on-site power generation equipment and systems. Electrical Generator Systems Technician Journeymen have knowledge of electricity, mechanical, and electrical components and the interactions between them and are proficient in the installation, service, maintenance, and repair of on-site power generation systems. Candidate must meet experience eligibility requirements and pass an exam.
Click here to go to Electrical Power Testing - Level I COOL Snapshot page.

Renewal Period: 3 years

The National Institute for Certification in Engineering Technologies (NICET), Electrical Power Testing - Level I credential is an entry-level certification for electrical technicians who test equipment used in the production, transmission, and distribution of electrical power. The certification validates a technician’s knowledge required to inspect, test, and maintain electrical power equipment. Electrical Power Testing - Level I technicians work under the supervision of a higher-level technician and perform duties such as isolating and ground power equipment safely, connecting test equipment, and conducting and documenting standard tests of basic single-function equipment. Candidates must meet experience requirements and pass a written exam.

Click here to go to Electrical Power Testing - Level II COOL Snapshot page.

Renewal Period: 3 years

The National Institute for Certification in Engineering Technologies (NICET), Electrical Power Testing - Level II credential is a mid-level certification for electrical technicians who test equipment used in the production, transmission, and distribution of electrical power. The certification validates knowledge required to inspect, test and maintain electrical power equipment. Electrical Power Testing - Level II technicians work under general supervision and perform duties including, isolate and ground power equipment safely; connect test equipment; and conduct and document standard tests of basic (single-function) equipment. Candidates must meet experience requirements and pass a written exam.
Click here to go to Electrical Power Testing - Level III COOL Snapshot page.

Renewal Period: 3 years

The National Institute for Certification in Engineering Technologies (NICET), Electrical Power Testing - Level III certification is an intermediate-level credential designed for technicians who inspect, test and maintain equipment used in the production, transmission, and distribution of electrical power. Electrical Power Testing - Level III technicians manage switching procedures, perform tests of complex equipment, analyze test and equipment data, plan work and manage teams. Candidates must meet experience requirements and pass a written exam.

Click here to go to Electrical Power Testing - Level IV COOL Snapshot page.

Renewal Period: 3 years

The National Institute for Certification in Engineering Technologies (NICET), Electrical Power Testing - Level IV certification is an advanced-level credential for technicians who inspect, test, and maintain equipment used in the production, transmission, and distribution of electrical power. Electrical Power Testing - Level IV technicians conduct tests of complex metering and relay systems, evaluate tests, test equipment, test results, power system performance, recommend actions to maintain or improve system performance, and lead multi-team projects. Candidates must meet experience requirements and pass a written exam.

Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various electrical and electronics concepts, electronic measurement equipment, electronic components, circuitry, and other related subjects specific to direct current (DC) electronics. The EM1 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate AC (EM2) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of AC, safety, cabling, and other procedures. The EM2 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electrical Generator Systems Technician Certification - Apprentice COOL Snapshot page.

Renewal Period: 3 years

The Electrical Generating Systems Association (EGSA), Electrical Generator Systems Technician Certification - Apprentice is an entry-level certification that demonstrates an individual's knowledge of on-site power generation equipment and systems. Electrical Generator Systems Technician Apprentices have knowledge of electricity, mechanical, and electrical components and the interactions between them and are proficient in the installation, service, maintenance, and repair of on-site power generation systems. There are no formal education or experience requirements, but candidates must pass a written exam.
Click here to go to ETT Certified Assistant Level 2 COOL Snapshot page.

The ETT Certified Assistant Level 2 performs limited testing and service work typically under direct supervision. The Certification holder has sufficient knowledge and experience to be qualified for assuring the safety of themselves on the job site. Safety knowledge includes an understanding of lockout/tagout procedures and requirements, arc-flash and shock hazard analyses, and other facets of hazardous electrical energy control procedures. The holders of the ETT Certified Assistant Level 2 generally require direct supervision of a Level 3 ETT Certified Technician or higher.
Click here to go to ETT Certified Technician Level 3 COOL Snapshot page.

The InterNational Electrical Testing Association (NETA), ETT Certified Technician Level 3 certification is for technicians who perform and manage routine and moderately complex tasks and projects, record keeping, evaluation of test data, and responsibility for the safety of others. ETT Certified Technicians Level 3 are qualified to provide guidance, supervise ETT Trainee Technicians (Level 1) and ETT Certified Assistant Technicians (Level 2), and perform electrical power switching. ETT Certified Technician Level 3 candidates must have 24 hours of safety education and training in addition to meeting Level 2 safety education and training requirements (64 hours total) and 240 hours of electrical education and training in addition to meeting Level 2 electrical education and training requirements (400 hours total). Candidates must have five years of related experience and have met the qualifications for ETT Trainee Technician Level 1 and ETT Certified Assistant Technician Level 2 in successive order. Candidates must also pass a written exam.
Click here to go to ETT Certified Senior Technician Level 4 COOL Snapshot page.

The InterNational Electrical Testing Association (NETA), ETT Certified Senior Technician Level 4 certification, is the most senior level of a Certified Electrical Testing Technicians classification. An ETT Certified Senior Technician Level 4 is responsible for supervising large projects and multiple crews. In addition, the Level 4 Technician will perform complex investigations, tests, and evaluations, and prepare written reports as needed. Applicant must have a minimum of 104 hours of safety training, 600 hours of electrical training, 10 years of related experience, and have met all of the appropriate qualifications for Levels 1, 2, and 3 in successive order. Applicant must pass a written exam.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Powerhouse, Substation, and Relay
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Powerhouse, Substation, and Relay

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical and Electronics Repairers, Powerhouse, Substation, and Relay

Click here for the external link to: My Next Move for Veterans - Electrical Power-Line Installers and Repairers
Click here for the external link to: My Next Move salary info for Electrical Power-Line Installers and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical Power-Line Installers and Repairers

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - Power Distributors and Dispatchers
Click here for the external link to: My Next Move salary info for Power Distributors and Dispatchers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Power Distributors and Dispatchers

Click here for the external link to: My Next Move for Veterans - Power Plant Operators
Click here for the external link to: My Next Move salary info for Power Plant Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Power Plant Operators

Click here for the external link to: My Next Move for Veterans - Stationary Engineers and Boiler Operators
Click here for the external link to: My Next Move salary info for Stationary Engineers and Boiler Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Stationary Engineers and Boiler Operators

This credential has been accredited by:
This credential has been accredited by: