MOS 94R Avionic and Survivability Equipment Repairer

MOS Description

The avionics and survivability equipment repairer performs field and sustainment level maintenance on avionic navigation flight control systems, stabilization systems, equipment which operates using radar principles, and aircraft survivability equipment. For more information on MOS 94R, see this Army website.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Additional information pertaining to MOS 94R Avionic and Survivability Equipment Repairer can be found below.

Federal Aviation Administration

At the FAA, Air Traffic Control Specialists (ATCS) have three distinct areas of specialization :

  1. Terminal (Tower) Controllers, who control air traffic at airports and give pilots taxiing and takeoff instruction, air traffic clearances and advice
  2. En Route Center Controllers, who give aircraft instructions, air traffic clearances, and advice regarding flight conditions while en route between airports
  3. Flight Service Station Controllers, who provide preflight, in-flight and emergency assistance to all pilots on request

In addition to an Air Traffic Controller certificate, air traffic control specialists must possess :

  • A rating for the facility to which they are assigned. This facility rating requires a demonstrated knowledge of the kind and location of radio aids to air navigation, the terrain, the landmarks, the communications systems and circuits, and the procedures peculiar to the area covered by the facility. All required certificates and ratings must be obtained within time limits established by the agency management.
  • At least a second class Medical Examination detailed in 14 CFR Part 67. Medical examinations must be conducted by a FAA-designated Aviation Medical Examiner.

Although there are provisions for hiring individuals with no previous air traffic controller experience, as of early 2002, the FAA is only hiring graduates of FAA-approved post-secondary educational programs, current or former federal employees (including former military members eligible for a Veteran's Readjustment Appointment), or Retired Military Air Traffic Controllers for positions in the En Route Center or Terminal specialty areas.

To be eligible for the program, you must meet all of the following criteria :

  • Be on terminal leave pending retirement from active duty military service or have retired from active duty military service on or after September 17, 1999.
  • Have received either an air traffic control specialist certification and/or a facility rating according to FAA standards.
  • Meet all application, qualification and position requirements, including applicable medical and security requirements.

Controllers hired under this program are given time-limited appointments, meaning that their appointments will have a specific termination date attached to them. The initial appointment may be up to 10 years and may not exceed the last day of the month in which the controller turns age 56. Appointments can be extended for up to five years at a time.

You will be required to submit a Retired Military Controller Specialist Job Application and proof of your retired status (Form DD 214). Do not submit the OF-612 federal job application form. Other FAA Application Forms you may need are located at the FAA website.

Eligibility requirements, privileges, and performance standards for Air Traffic Tower Operators and Aircraft Dispatchers are detailed in 14 CFR Part 65.

Top
This is an official U.S. Army websiteUpdated: August 31, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

Promo Points

This credential has been approved for promotion points. Click for more information.   Click to go to related promotion points site.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Basic Electricity and Electronics - Alternating Current (BEE-AC) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Alternating Current (BEE-AC) certification is an entry-level credential designed for technicians in the electricity and electronics field. The BEE-AC certification validates a professional's knowledge of various AC theories, equipment, math, cabling, and other related subjects. Applicants must meet training, experience, or education requirements. Any active or veteran military personnel whose rating or assignment is/was in the appropriate field are eligible for the BEE-AC exam. Applicants must pass a written exam.

Click here to go to Basic Electricity and Electronics - Direct Current (BEE-DC) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Direct Current (BEE-DC) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills and validates applicant's knowledge of basic electrical theory, magnetism, electrical safety, electronic equipment and components laws, circuits and other related subjects. Applicants must meet training, experience, or education requirements. Any active or veteran military personnel whose rating or assignment is/was in the appropriate field are eligible for the BEE-DC exam. Applicants must pass a written exam.
Click here to go to Basic Electricity and Electronics - Analog (BEE-A) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Analog (BEE-A) is an entry-level credential designed for technicians in the electricity and electronics field. BEE-A applicants must have experience with hands-on troubleshooting skills and have knowledge of various analog components, electronics, power, and other related subjects. Applicants must meet education, experience and training requirements. Applicants must pass a written exam.
Click here to go to Basic Electricity and Electronics - Digital (BEE-D) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Digital (BEE-D) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills and validates applicant's knowledge of various digital electricity and electronics theories, safety precautions, conversions, diagrams, and other related subjects. Applicants must meet education, experience, and training requirements. Applicants must pass a written exam.
Click here to go to Avionics Electronics Technician (AVN) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Avionics Electronics Technicians (AVN) certification validates the knowledge and skills of individuals who install, maintain and adjust electronics equipment, cabling and the accessories used in aviation communications and control equipment. AVNs demonstrate an understanding of avionics systems, cabling, computers and digital concepts, amplifiers, interfacing, antennas and transmission lines components, mathematics, network topologies and infrastructures, people relations, optical cabling, safety, test equipment and tools and satellite communications. Candidates must pass a written exam.
Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) is designed for technicians who have less than two years of experience or training in electronics. The CETa is the foundation for ETA’s journeyman, senior, and master specialty, and master certification programs. CETa applicants must meet the experience or training requirement and pass a written exam.
Click here to go to Computer Service Technician (CST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Computer Service Technician (CST) is an entry-level credential for professionals who supply computer support. The CST exam assesses candidates’ skills in performing hardware servicing and system software skills for personal computers (PCs). CST candidates should have knowledge of PC components, operating systems, basic networking, troubleshooting, and safety procedures. Candidates must pass a written exam.
Click here to go to Certified Hazardous Materials Manager (CHMM) COOL Snapshot page.

Renewal Period: 5 years

The Institute of Hazardous Materials Management (IHMM), Certified Hazardous Material Manager (CHMM) certification demonstrates a professional's ability to handle, manage, or advise others on hazardous materials in a safe and compliant manner. A CHMM may work for a corporation, business, government, or in a related field associated with hazardous materials such as environmental protection, safety, hazmat transportation, or security.  Candidates must have a minimum of a Bachelor’s degree from an accredited college or university and four years of relevant work experience.  Candidates must also pass a written exam.

Click here to go to Certified Electronics Technician - Associate-Level (Associate CET) COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level (Associate CET), is an entry-level certification for technicians and students with under four years of experience and validates the technician’s knowledge of basic electronics, including math, DC and AC circuts, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.
Click here to go to Commercial Driver's License (CDL) COOL Snapshot page.

The United States Department of Transportation, Federal Motor Carrier Safety Administration (FMCSA), Commercial Driver's License (CDL) is for individuals who drive certain Commercial Motor Vehicles (CMVs). There are three classes of CDLs with endorsements for specialized qualifications for vehicles like school buses, tank trucks, and tractor trailers. The U.S. Department of Transportation requires drivers to obtain and hold a CDL if they operate in interstate, intrastate, or foreign commerce and drive a vehicle that meets one or more of the classifications of a CMV described on the FMSCA website. FMSCA has developed and issued standards for state testing and licensing of CDL holders. These standards require state governments to issue CDLs to certain CMV drivers only after the driver passes knowledge and skills testing that is administered by the state and related to the type of vehicle the driver expects to operate.
Click here to go to NCATT Aircraft Electronics Technician (AET) COOL Snapshot page.

Renewal Period: Lifetime

The ASTM International, NCATT Aircraft Electronics Technician (AET) is the primary NCATT certification and is required for ASTM International endorsements in the career field. The AET certification recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. AET knowledge and skills include basic electronics facts, terminology, and principles, common maintenance practices, fundamentals of equipment maintenance, and aircraft fundamentals. There are no AET eligibility requirements. The AET written exam is open to all individuals regardless of career field, training, education or experience.
Click here to go to Certified Hazardous Materials Practitioner (CHMP) COOL Snapshot page.

Renewal Period: 5 years

The Institute for Hazardous Materials Management (IHMM), Certified Hazardous Materials Practitioner (CHMP) certification is a standard of proficiency for front-line hazardous materials workers. The CHMP is intended to enhance regulatory compliance, safety, and overall credibility of operations, and provide recognition to individuals who meet its rigorous requirements. Candidates must meet a combination of education and/or experience requirements and pass a written exam.

 

Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various electrical and electronics concepts, electronic measurement equipment, electronic components, circuitry, and other related subjects specific to direct current (DC) electronics. The EM1 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate AC (EM2) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of AC, safety, cabling, and other procedures. The EM2 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Analog (EM3) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Analog (EM3) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of diodes, transistors, thyristors, integrated circuits, optoelectronic devices, power supplies, basic test equipment and measurements, mathematics and formulas, amplifiers, and other related subjects. The EM3 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Digital (EM4) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Digital (EM4) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various digital electricity and electronics concepts, numbering systems and conversions, and other related subjects. The EM4 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Comprehensive (EM5) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Comprehensive (EM5) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of soldering, desoldering, tools, electrical conductors, AC power distribution, circuit protection, circuit controls, generators, motors, interfacing of electronics products, and technician work procedures. The EM5 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Aircraft Mechanics and Service Technicians
Click here for the external link to: My Next Move salary info for Aircraft Mechanics and Service Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Aircraft Mechanics and Service Technicians

Click here for the external link to: My Next Move for Veterans - Avionics Technicians
Click here for the external link to: My Next Move salary info for Avionics Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Avionics Technicians

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Click here for the external link to: My Next Move for Veterans - Electronics Engineering Technicians
Click here for the external link to: My Next Move salary info for Electronics Engineering Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electronics Engineering Technicians

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - Heavy and Tractor-Trailer Truck Drivers
Click here for the external link to: My Next Move salary info for Heavy and Tractor-Trailer Truck Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Heavy and Tractor-Trailer Truck Drivers

This credential has been accredited by:
This credential has been accredited by: