MOS 94E Radio Equipment Repairer

MOS Description

The Radio Equipment Repairer performs or supervises field level maintenance on radio receivers, transmitters, and associated equipment. For more information on MOS 94E, see this Army website.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Top
This is an official U.S. Army websiteUpdated: October 30, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

Promo Points

This credential has been approved for promotion points. Click for more information.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Basic Electricity and Electronics - Alternating Current (BEE-AC) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Alternating Current (BEE-AC) certification is an entry-level credential designed for technicians in the electricity and electronics field. The BEE-AC certification validates a professional's knowledge of various AC theories, equipment, math, cabling, and other related subjects. Applicants must meet training, experience, or education requirements. Any active or veteran military personnel whose rating or assignment is/was in the appropriate field are eligible for the BEE-AC exam. Applicants must pass a written exam.

Click here to go to Basic Electricity and Electronics - Direct Current (BEE-DC) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Direct Current (BEE-DC) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills and validates applicant's knowledge of basic electrical theory, magnetism, electrical safety, electronic equipment and components laws, circuits and other related subjects. Applicants must meet training, experience, or education requirements. Any active or veteran military personnel whose rating or assignment is/was in the appropriate field are eligible for the BEE-DC exam. Applicants must pass a written exam.
Click here to go to Basic Electricity and Electronics - Analog (BEE-A) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Analog (BEE-A) is an entry-level credential designed for technicians in the electricity and electronics field. BEE-A applicants must have experience with hands-on troubleshooting skills and have knowledge of various analog components, electronics, power, and other related subjects. Applicants must meet education, experience and training requirements. Applicants must pass a written exam.
Click here to go to Basic Electricity and Electronics - Digital (BEE-D) COOL Snapshot page.

Renewal Period: 3 years

The Certifying Technical Employee Competence (CertTEC), Basic Electricity and Electronics - Digital (BEE-D) certification is an entry-level credential designed for technicians in the electricity and electronics field. The exam tests applicant's hands-on troubleshooting skills and validates applicant's knowledge of various digital electricity and electronics theories, safety precautions, conversions, diagrams, and other related subjects. Applicants must meet education, experience, and training requirements. Applicants must pass a written exam.
Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) is an entry-level certification for technicians who have less than two years of experience or training in electronics. Associate Electronics Technicians demonstrate knowledge of basic electronic theory and applications used in all electronic disciplines including circuits, test equipment, electrical theory, work procedures and telecommunications fundamentals. The CETa is the foundation for ETA’s journeyman, senior, and master specialty, and master certification programs. CETa applicants must meet the experience or training requirement and pass a written exam. An optional practical exam is offered.
Click here to go to Senior Certified Electronics Technician (CETsr) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Senior Certified Electronics Technician (CETsr) is an advanced level certification intended for, but not limited to, the professional electronics service technicians, technician managers, consultants, and electronics educators who have been active in the industry for six or more years. CETsr candidates must pass a written exam which includes the Associate level exam, plus one of the specialized Journeyman options.
Click here to go to Certified Electronics Technician - Journeyman-Level - Communications COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians, Certified Electronics Technician - Journeyman-Level - Communications credential is for technicians working in the electronics field. Candidates must demonstrate knowledge of two-way transceivers and how to service them. Candidates also must understand communication theory, transmitters, deviation, sensitivity, quieting, and troubleshooting. Candidates must pass a written exam.
Click here to go to Certified Safety Professional (CSP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Certified Safety Professional (CSP) is an intermediate-level credential for professionals who support workplace safety practices. CSPs conduct worksite assessments, determine risk, measure hazards and controls, evaluate risk and hazard control measures, investigate incidents, maintain incident and loss records, and prepare emergency response plans. CSP candidates must meet experiential requirements that relate to the field of workplace safety. Candidates must pass a written exam.
Click here to go to Fiber Optics Installer (FOI) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Fiber Optic Installers (FOI) certification is for fiber optic technicians. FOIs demonstrate a general understanding of optical fiber installation, connectors, splice performance characteristics, and testing optical fibers. In addition, FOIs are proficient in the installation of connectors on various types of fiber optic cables using multiple types of connectors and can perform mechanical and fusion splicing. Candidates are required to pass both a written exam and a Hands-On Skills Test.

Click here to go to Computer Service Technician (CST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Computer Service Technician (CST) credential is for professionals who service hardware and provide systems software skills for personal computers. CSTs demonstrate knowledge in areas including, computer assembly/disassembly, motherboards, processor characteristics, system resources, buses, ports, peripheral devices, physical and electronic memory characteristics, secondary storage devices, and power concepts and supplies. Candidates must pass a written exam.
Click here to go to Certified Hazardous Materials Manager (CHMM) COOL Snapshot page.

Renewal Period: 5 years

The Institute of Hazardous Materials Management (IHMM), Certified Hazardous Material Manager (CHMM) certification demonstrates a professional's ability to handle, manage, or advise others on hazardous materials in a safe and compliant manner. A CHMM may work for a corporation, business, government, or in a related field associated with hazardous materials such as environmental protection, safety, hazmat transportation, or security.  Candidates must have a minimum of a Bachelor’s degree from an accredited college or university and four years of relevant work experience.  Candidates must also pass a written exam.

Click here to go to CompTIA A+ ce COOL Snapshot page.

Renewal Period: 3 years

The CompTIA A+ ce certification demonstrates competency as a computer support technician. The A+ ce certification is appropriate for entry-level technicians who perform tasks such as installation, configuration, diagnosing, preventive maintenance and basic networking. Security, safety and environmental issues, and communication and professionalism are also covered. It is recommended, although not required, that candidates have nine to twelve months of related hands-on experience as an IT professional.
Click here to go to Network Systems Technician (NST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Network Systems Technician (NST) certification is for a network professional who has knowledge of computer network basic concepts, which are applicable to all the various specialty areas of the computer industry. The NST demonstrates knowledge domains includeing, Computer Network Terminology, Network Administration, Wide Area Networks and Devices Used to Extend Networks, Network Architectures, Computer Network Topologies and Classifications, Network Services, Network Operations, and Network Standards. Candidates must pass a written exam.
Click here to go to Fiber Optics Technician (FOT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Fiber Optics Technician (FOT) certification is for the fiber optics professional with an understanding of concepts of fiber optics servicing, troubleshooting, and repairing. FOTs demonstrate knowledge of fiber optic transmissions, cables principal of light, optical fiber characteristics, optical fiber construction and theory, safety and other related topics. The ETA-I Fiber Optics Installer (FOI) certification is a pre-requisite for this certification. Candidates must pass a written exam and a hands-on skills test.
Click here to go to GMDSS Radio Maintainer License (DM) COOL Snapshot page.

Renewal Period: Lifetime

The Federal Communications Commission (FCC), GMDSS Radio Maintainer License (DM) is a mid-level license that qualifies personnel as GMDSS radio maintainers to perform at sea repair and maintenance of GMDSS equipment. It also confers the operating authority of the General Radiotelephone Opertaor License (PG) and the Marine Radio Operator Permit (MP). The Global Maritime Distress Safety System (GMDSS) is an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols used to increase safety and make it easier to rescue distressed ships, boats and aircraft. FCC requires candidates to be a legal resident of the United States and be fluent in the English language. Candidates must pass a written exam.
Click here to go to GMDSS Radio Operator License (DO) COOL Snapshot page.

Renewal Period: Lifetime

The Federal Communications Commission (FCC), GMDSS Radio Operator License (DO) is an entry- level license that qualifies the holder to operate and make some basic equipment adjustments to Global Maritime Distress and Safety System (GMDSS) radio installations and confers the operating authority of the MP. The Global Maritime Distress Safety System (GMDSS) is an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols used to increase safety and make it easier to rescue distressed ships, boats and aircraft. FCC requires candidates to be a legal resident of the United States and be fluent in the English language. Candidates must pass a written exam.
Click here to go to Marine Radio Operator Permit (MP) COOL Snapshot page.

Renewal Period: Lifetime

The Federal Communications Commission (FCC), Marine Radio Operator Permit (MP) is an intermediate-level communications license for individuals who operate radios on boats and some aircraft. MPs are required to operate radiotelephone stations aboard certain vessels that sail the Great Lakes. They are also required to operate radiotelephone stations aboard vessels of more than 300 gross tons and vessels which carry more than six passengers for hire in the open sea or any tidewater area of the United States. In addition, they are also required to operate certain aviation radiotelephone stations and certain coast radiotelephone stations. FCC requires candidates to be a legal resident of the United States and be fluent in the English language. Candidates must pass a written exam.
Click here to go to Restricted Radiotelephone Operator Permit (RR) COOL Snapshot page.

Credential description coming soon.
Click here to go to Ship Radar Endorsement COOL Snapshot page.

Renewal Period: Lifetime

The Federal Communications Commission (FCC), Ship Radar Endorsement is an endorsement to a commercial radio operator license that authorizes the holder to repair, maintain, or internally adjust ship radar equipment. Only license holders with this endorsement may perform these activities.  FCC requires candidates to hold (or qualify for) one of five other FCC licenses. Candidates must pass a written exam.

Click here to go to Certified Electronics Technician - Associate-Level (Associate CET) COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level (Associate CET), is an entry-level certification for technicians and students with under four years of experience and validates the technician’s knowledge of basic electronics, including math, DC and AC circuts, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Computer COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians, Certified Electronics Technician - Journeyman-Level - Computers credential is for technicians working in the field of electronics. Candidates must demonstrate an understanding of computer systems and hardware and must show proficiency in basic arithmetic and logic operations as they relate to computer theory, computer organization, memory and storage, and input and output equipment. The technician should have some knowledge of software and programming, and be able to explain troubleshooting procedures. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Industrial COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Journeyman-Level – Industrial credential is for technicians working in the electronics field. Candidates must demonstrate knowledge of characteristics and applications of industrial electronic components, and the operation of devices such as triacs, SCRs, diacs, and Shockley diodes. In addition, candidates must understand transducers, transistors and op-amps operations, single-phase and three-phase control systems, motors, PLCs, and industrial electronics safety and hydraulic and pneumatic systems. Candidates must pass a written exam.

Click here to go to Certified Electronics Technician - Journeyman-Level - Radar COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician -Journeyman-Level – Radar credential validates the technician’s general knowledge of both continuous wave and pulse radar operation. Candidates must know about transmitters and receivers, antennas, transmission lines and their characteristics and CRT display systems and their power supplies. Candidates must pass a written exam.
Click here to go to CompTIA Network+ ce COOL Snapshot page.

Renewal Period: 3 years

Computing Technology Industry Association (CompTIA), Network+ ce is an intermediate skill level certification for IT technicians who can describe the features and functions of networking components and manage, maintain, troubleshoot, install, operate and configure basic network infrastructure. In addition, certification holders have a basic understanding of enterprise technologies, including cloud and virtualization technologies. Network+ ce is appropriate for computer network technicians, engineers, analysts and administrators. Although not a prerequisite, it is recommended that CompTIA Network+ ce candidates have at least nine months of experience in network support or administration or academic training, along with a CompTIA A+ ce certification.
Click here to go to Certified Wireless Network Administrator (CWNA) COOL Snapshot page.

Renewal Period: 3 years

The Certified Wireless Network Professional (CWNP), Certified Wireless Network Administrator (CWNA) is a base certification for Enterprise Wi-Fi within the CWNP family of certifications. Candidates must have an understanding of the fundamentals of RF behavior and the ability to describe the features and functions of WLAN components as they apply to WLAN administration. CWNA candidates must have the skills needed to install, configure, and troubleshoot WLAN hardware peripherals and protocols in small business and enterprise deployments. Candidates must pass a written exam.
Click here to go to Certified Wireless Network Trainer (CWNT) COOL Snapshot page.

Renewal Period: 1 year

The Certified Wireless Network Professional (CWNP), Certified Wireless Network Trainer (CWNT) is an instructor certification. CWNT certified instructors are qualified to deliver CWNP training courses through Authorized Learning Centers. CWNT's possess the training to teach today’s enterprise Wi-Fi technologies and solutions in hands-on classroom environments.
Click here to go to Wireless Communications Electronics Technician (WCM) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Wireless Communications Electronics Technician (WCM) certification is a journeyman-level credential for wireless technicians. The WCM certification is targeted toward professionals performing installation, maintenance and repair of mobile and fixed radio communications systems. Candidates seeking the ETA-I WCM credential are required to have a basic education in fundamental electronics and must pass the Associate (CETa) exam before qualifying to sit for the Journeyman level certification exam. However, candidates who hold a valid FCC GROL and either an ETA-I Associate CET (CETa), General Communications Technician - Level 1 (GCT1) or Journeyman CET certification are eligible to rollover to an ETA-I Wireless Communications (WCM) certification.
Click here to go to Commercial Driver's License (CDL) COOL Snapshot page.

The United States Department of Transportation, Federal Motor Carrier Safety Administration (FMCSA), Commercial Driver's License (CDL) is for individuals who drive certain Commercial Motor Vehicles (CMVs). There are three classes of CDLs with endorsements for specialized qualifications for vehicles like school buses, tank trucks, and tractor trailers. The U.S. Department of Transportation requires drivers to obtain and hold a CDL if they operate in interstate, intrastate, or foreign commerce and drive a vehicle that meets one or more of the classifications of a CMV described on the FMSCA website. FMSCA has developed and issued standards for state testing and licensing of CDL holders. These standards require state governments to issue CDLs to certain CMV drivers only after the driver passes knowledge and skills testing that is administered by the state and related to the type of vehicle the driver expects to operate.
Click here to go to CompTIA Security+ ce COOL Snapshot page.

Renewal Period: 3 years

Computing Technology Industry Association (CompTIA), Security+ ce certification designates knowledgeable professionals in the field of IT security. Security+ ce is an entry-level certification that demonstrates a candidates knowledge and skills required to install and configure systems to secure applications, networks, and devices; perform threat analysis and respond with appropriate mitigation techniques; participate in risk mitigation activities; and operate with an awareness of applicable policies, laws, and regulations. The successful candidate will perform these tasks to support the principles of confidentiality, integrity, and availability. It is recommended that candidates hold the Network+ and two years of experience in IT administration with a security focus.
Click here to go to NCATT Aircraft Electronics Technician (AET) COOL Snapshot page.

Renewal Period: Lifetime

The ASTM International, NCATT Aircraft Electronics Technician (AET) is the primary NCATT certification and is required for ASTM International endorsements in the career field. The AET certification recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. AET knowledge and skills include basic electronics facts, terminology, and principles, common maintenance practices, fundamentals of equipment maintenance, and aircraft fundamentals. There are no AET eligibility requirements. The AET written exam is open to all individuals regardless of career field, training, education or experience.
Click here to go to Certified Electronics Technician - Journeyman-Level - Consumer Electronics COOL Snapshot page.

Certified Electronics Technician - Journeyman-Level - Consumer Electronics. This is an entry-level certification exam. Technicians working in this field will have knowledge in the following areas; antennas and transmission lines, digital and linear circuits in consumer electronics, servicing problems on televisions and VCRs, use of test equipment, and troubleshooting consumer products. Applicants must pass a written exam.
Click here to go to Certified Hazardous Materials Practitioner (CHMP) COOL Snapshot page.

Renewal Period: 5 years

The Institute for Hazardous Materials Management (IHMM), Certified Hazardous Materials Practitioner (CHMP) certification is a standard of proficiency for front-line hazardous materials workers. The CHMP is intended to enhance regulatory compliance, safety, and overall credibility of operations, and provide recognition to individuals who meet its rigorous requirements. Candidates must meet a combination of education and/or experience requirements and pass a written exam.

 

Click here to go to Associate Safety Professional (ASP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Associate Safety Professional (ASP) certification validates an individual's knowledge and experience in the safety profession. ASP certifies an individual's ability to perform at least 50% of professional-level safety duties in safety, health, environment, and ergonomics. Safety professionals are required to make worksite assessments to determine risks, potential hazards and controls, evaluate risks and hazard control measures for equipment, systems, facilities, and processes, investigate incidents, maintain and evaluate incident and loss records, and prepare emergency response plans. ASP candidates must meet a combination of education and experience requirements. Candidates must take a written exam.
Click here to go to GIAC Certified Project Manager Certification (GCPM) COOL Snapshot page.

The Global Information Assurance Certification (GIAC), Certified Project Manager Certification (GCPM) is a mid-level certification designed for security professionals, project leads, and managers. The GCPM demonstrates an understanding of and the ability to lead project teams, technical project management methodology, and its implementation. The GCPM affirms the critical skill sets associated with making projects successful, including effective communication, time, cost, quality, procurement and risk management of IT projects and application development. There is no specific training required for the GCPM. Candidates must pass a written exam.
Click here to go to General Communications Technician - Level 1 (GCT1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), General Communications Technician Level 1 (GCT1) certification is an entry-level credential designed to cover the many areas encountered by radio communications technicians or engineers in the public safety communications or business/commercial radio field. The GCT1 certification is modeled after wide-ranging industry communication systems encompassing more specific detailed items along with the U.S. Department of Homeland Security (DHS) guidelines covering all disciplines in the COMT program. Candidates must pass a written exam.
Click here to go to Termination and Testing Technician (TTT) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Termination and Testing Technician (TTT) certification is for  technicians who terminate, connect, test, and troubleshoot IP-enabled voice/data/video cable and devices to each other using connectors, tools and techniques specific to fiber optic, copper pairs, and coaxial cabling. The training emphasizes vender neutrality. A cable that is correctly terminated and tests satisfactorily should connect with any proper device from any manufacturer. Candidates must pass a written exam and a hands-on skill test.
Click here to go to Mobile Communications and Electronics Installer (MCEI) COOL Snapshot page.

The Electronics Technicians Association (ETA-I), Mobile Communications and Electronics Installer (MCEI) credential is for candidates who install land mobile radio (LMR) and associated equipment. MCEIs must have knowledge of how to install, remove and reinstall LMR equipment. Candidates must pass a written exam.
Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. The EM1 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written examination.
Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate AC (EM2) credential is for technicians in the electricity and electronics field. The EM2 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written exam.
Click here to go to Electronics Associate Analog (EM3) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate Analog (EM3) is an entry-level credential designed for technicians in the electricity and electronics field. The EM3 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa).  Candidates must pass a written examination.
Click here to go to Electronics Associate Digital (EM4) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate Digital (EM4) is an entry-level credential designed for technicians in the electricity and electronics field. The EM4 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written examination.
Click here to go to Electronics Associate Comprehensive (EM5) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Electronics Associate Comprehensive (EM5) is an entry-level credential designed for technicians in the electricity and electronics field. The EM5 can be a stand-alone certification for candidates requiring a narrower set of knowledge and skills or it can be part of the EM program, which requires that candidates attain five modules towards the eventual goal of achieving ETA’s Associate level certification (CETa). Candidates must pass a written examination.
Click here to go to ETT Certified Assistant Level 2 COOL Snapshot page.

The ETT Certified Assistant Level 2 performs limited testing and service work typically under direct supervision. The Certification holder has sufficient knowledge and experience to be qualified for assuring the safety of themselves on the job site. Safety knowledge includes an understanding of lockout/tagout procedures and requirements, arc-flash and shock hazard analyses, and other facets of hazardous electrical energy control procedures. The holders of the ETT Certified Assistant Level 2 generally require direct supervision of a Level 3 ETT Certified Technician or higher.
Click here to go to ETT Certified Technician Level 3 COOL Snapshot page.

The InterNational Electrical Testing Association (NETA), ETT Certified Technician Level 3 certification is for technicians who perform and manage routine and moderately complex tasks and projects, record keeping, evaluation of test data, and responsibility for the safety of others. ETT Certified Technicians Level 3 are qualified to provide guidance, supervise ETT Trainee Technicians (Level 1) and ETT Certified Assistant Technicians (Level 2), and perform electrical power switching. ETT Certified Technician Level 3 candidates must have 24 hours of safety education and training in addition to meeting Level 2 safety education and training requirements (64 hours total) and 240 hours of electrical education and training in addition to meeting Level 2 electrical education and training requirements (400 hours total). Candidates must have five years of related experience and have met the qualifications for ETT Trainee Technician Level 1 and ETT Certified Assistant Technician Level 2 in successive order. Candidates must also pass a written exam.
Click here to go to ETT Certified Senior Technician Level 4 COOL Snapshot page.

The InterNational Electrical Testing Association (NETA), ETT Certified Senior Technician Level 4 certification, is the most senior level of a Certified Electrical Testing Technicians classification. An ETT Certified Senior Technician Level 4 is responsible for supervising large projects and multiple crews. In addition, the Level 4 Technician will perform complex investigations, tests, and evaluations, and prepare written reports as needed. Applicant must have a minimum of 104 hours of safety training, 600 hours of electrical training, 10 years of related experience, and have met all of the appropriate qualifications for Levels 1, 2, and 3 in successive order. Applicant must pass a written exam.
Click here to go to CompTIA IT Fundamentals (ITF+) COOL Snapshot page.

Renewal Period: Lifetime

The CompTIA IT Fundamentals (ITF+) certification is an entry level certification for those beginning a career in the field of information technology (IT) or those in a field where a general knowledge of IT is necessary.  To earn the certification, candidates must pass one exam covering foundational IT concepts such as understanding the basics of computing, IT infrastructure, software development, and database use. There are no experience requirements that must be met prior to taking the exam.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Computer Operators
Click here for the external link to: My Next Move salary info for Computer Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Computer Operators

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Click here for the external link to: My Next Move for Veterans - Electronics Engineering Technicians
Click here for the external link to: My Next Move salary info for Electronics Engineering Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electronics Engineering Technicians

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - Heavy and Tractor-Trailer Truck Drivers
Click here for the external link to: My Next Move salary info for Heavy and Tractor-Trailer Truck Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Heavy and Tractor-Trailer Truck Drivers

Click here for the external link to: My Next Move for Veterans - Network and Computer Systems Administrators
Click here for the external link to: My Next Move salary info for Network and Computer Systems Administrators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Network and Computer Systems Administrators

Click here for the external link to: My Next Move for Veterans - Radio Operators
Click here for the external link to: My Next Move salary info for Radio Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Radio Operators

Click here for the external link to: My Next Move for Veterans - Radio, Cellular, and Tower Equipment Installers and Repairers
Click here for the external link to: My Next Move salary info for Radio, Cellular, and Tower Equipment Installers and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Radio, Cellular, and Tower Equipment Installers and Repairers

Click here for the external link to: My Next Move for Veterans - Telecommunications Equipment Installers and Repairers, Except Line Installers
Click here for the external link to: My Next Move salary info for Telecommunications Equipment Installers and Repairers, Except Line Installers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Telecommunications Equipment Installers and Repairers, Except Line Installers

This credential has been accredited by:
This credential has been accredited by: