MOS 91E Allied Trades Specialist

MOS Description

The allied trades specialist supervises and performs the fabrication, repair and modifications of metallic and nonmetallic parts and supervises metalworking shop activities. For more information on MOS 91E, see this Army website.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Top
This is an official U.S. Army websiteUpdated: August 31, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

Promo Points

This credential has been approved for promotion points. Click for more information.   Click to go to related promotion points site.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Certified Welder (CW) COOL Snapshot page.

Renewal Period: 6 months

The American Welding Society (AWS), Certified Welder (CW) is a performance-based certification with no prerequisite courses or certifications required. The CW program tests welders on procedures used in the structural steel, petroleum pipelines, sheet metal and chemical refinery welding industries. There is a provision to test to a company-supplied or non-code welding specification. Tests for CW are performed at AWS Accredited Testing Facilities located throughout the world and are performance based. Final certification will provide candidates with a "transferrable" credential. 

Click here to go to Certified Associate Welding Inspector (CAWI) COOL Snapshot page.

Renewal Period: Not Renewable

The American Welding Society (AWS), Certified Associate Welding Inspector (CAWI) is an entry-level credential for individuals who perform welding quality control and quality assurance activities. Individuals who earn the CAWI work in every industry that uses welding as a core process in the manufacture, construction, or fabrication of their products. Those holidng the CAWI perform welding inspections under the active supervision of Senior Certified Welding Inspectors (SCWI) and Certified Welding Inspectors (CWI). CAWI candidates must meet experiential requirements and pass an exam.
Click here to go to Senior Certified Welding Inspector (SCWI) COOL Snapshot page.

Renewal Period: 3 years

The American Welding Society (AWS), Senior Certified Welding Inspector (SCWI) certification is an advanced-level credential for supervisory or managerial welding quality control and quality assurance professionals. SCWIs work in every industry that uses welding as a core process in the manufacture, construction, or fabrication of their products. SCWIs supervise others and are responsible for directing and performing operations to ensure that all welding-related activities meet applicable requirements. SCWIs work in every industry that uses welding as a core process in the manufacture, construction, or fabrication of their products. SCWIs know which factors influence welding quality; how to oversee welders to ensure higher-quality work; and the complementary factors that help maximize productivity. SCWIs must meet experiential requirements and pass an exam.
Click here to go to Certified Welding Educator (CWE) COOL Snapshot page.

Renewal Period: 4 years

The American Welding Society (AWS), Certified Welding Educator (CWE) is for industry professionals specializing in welding education. The Certified Welding Educator Program defines minimum standards for welding educators and to provide respected recognition for those who demonstrate the skills, knowledge, and experience needed. Certified Welding Educators understand welding training requirements, prepare instruction plans, conduct training classes, and evaluate student performance. They may use prepared instruction materials or develop their own original instructional materials. They are familiar with welding processes, welding procedures, welder qualifications, materials and the limitations of weld testing. They must be able to read drawings, prepare records and develop reports. Candidates must hold a high school diploma or equivalent and have at least five years of experience. Candidates must also hold a valid AWS Certified Welder certification or its equal, or pass the AWS Certified Welder examination. Candidates must pass a written and practical examination.
Click here to go to Certified Welding Inspector (CWI) COOL Snapshot page.

Renewal Period: 3 years

The American Welding Society (AWS), Certified Welding Inspector (CWI) is a mid-level certification for welding industry professionals. The Certified Welding Inspector certification requires a thorough knowledge of the complete fabrication and welding process. The CWI is widely recognized, both nationally and internationally, and successful companies have come to rely on this AWS certification when ensuring the highest level of quality workmanship. Candidates must pass a written and practical examination.
Click here to go to Machining Level I - Measurement, Materials, and Safety Skills COOL Snapshot page.

The Machining Level I - Measurement, Materials, and Safety Skills certification is an entry-level machinist credential. Applicants are not required to have any minimal education, experience or training, however passing the exam is required.
Click here to go to Machining Level I - Job Planning, Benchwork, & Layout Skills COOL Snapshot page.

The National Institute for Metalworking Skills, Inc (NIMS), Machining Level I certification is an entry-level machinist credential. Level I credentials identify and recognize machinists with the requisite skills required of a machinist who can perform machining tasks that involve job planning, benchwork, and layout work. Earning a NIMS certification requires the successful completion of both a performance assessment and a written examination. The performance assessment includes manufacturing a part, setting-up and operating a machine, and writing a program.
Click here to go to Machining Level I - Drill Press Skills I COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part.  There is only one project for the candidate to complete for each Machining Level I skill area.  Some skill areas encompass two or more performance requirements.  One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).
Click here to go to Certified Welding Supervisor (CWS) COOL Snapshot page.

Renewal Period: 3 years

The American Welding Society (AWS), Certified Welding Supervisor (CWS) certification is an advanced-level welding credential. CWSs work in every industry that uses welding as a core process in the manufacture, construction, or fabrication of their products. CWSs must know which factors influence welding quality; how to oversee welders to ensure higher-quality work; and the complementary factors that help maximize productivity.
Click here to go to Machining Level II - Manual Milling Skills II COOL Snapshot page.

Machining Level II - Manual Milling Skills II. Level II machining skills are used by skilled tradespersons who have achieved proficiency in the core competencies of Machining Skills Level I and have advanced to higher levels of technical competency or have developed new competencies. The general areas of competency remain: bench skills, metal cutting skills, inspection and quality assurance skills. Level II machining skills apply to both single-part and multiple-part production. A person who has achieved Level II machining skills competency has no direct supervision responsibilities for other operators or production workers. However, people who have achieved Level II competence will occasionally provide training for beginning machining technicians. Candidates must complete a performance evaluation.
Click here to go to Machining Level II - CNC Milling Skills II COOL Snapshot page.

Machining Level II - CNC Milling Skills II. Level II machining skills are used by skilled tradespersons who have achieved proficiency in the core competencies of Machining Skills Level I and have advanced to higher levels of technical competency or have developed new competencies. The general areas of competency remain: bench skills, metal cutting skills, inspection and quality assurance skills. Level II machining skills apply to both single-part and multiple-part production. A person who has achieved Level II machining skills competency has no direct supervision responsibilities for other operators or production workers. However, people who have achieved Level II competence will occasionally provide training for beginning machining technicians. Candidates must operate CNC milling machinery during a performance evaluation, which consists of creating a qualified CNC program, seting up and operating the mill, changing tool values as necessary, and replacing and qualifying tooling as necessary.
Click here to go to Machining Level II - CNC Turning Skills II COOL Snapshot page.

Machining Level II - CNC Turning Skills II. Level II machining skills are used by skilled tradespersons who have achieved proficiency in the core competencies of Machining Skills Level I and have advanced to higher levels of technical competency or have developed new competencies. The general areas of competency remain: bench skills, metal cutting skills, inspection and quality assurance skills. Level II machining skills apply to both single-part and multiple-part production. A person who has achieved Level II machining skills competency has no direct supervision responsibilities for other operators or production workers. However, people who have achieved Level II competence will occasionally provide training for beginning machining technicians. Given a CNC lathe, candidates must create a qualified CNC Program, setup and operate the lathe, change tool alues as necessary, replace and qualify tooling as necessary. More information about the performance evaluation can be found on the certifying agency's website.
Click here to go to Machining Level II - EDM - 2-Axis Wire COOL Snapshot page.

Machining Level II - EDM - 2-Axis Wire. Level II machining skills are used by skilled tradespersons who have achieved proficiency in the core competencies of Machining Skills Level I and have advanced to higher levels of technical competency or have developed new competencies. The general areas of competency remain: bench skills, metal cutting skills, inspection and quality assurance skills. Level II machining skills apply to both single-part and multiple-part production. A person who has achieved Level II machining skills competency has no direct supervision responsibilities for other operators or production workers. However, people who have achieved Level II competence will occasionally provide training for beginning machining technicians. Candidates must complete a performance evaluation, which states: Given a print, process plan, an appropriate selection of wire electrodes, workholding devices, EDM fluids, and 2 axis wire EDM machine, perform the EDM operation called out on the process plan. Candidates must match the requirements of the part print with a 125 microinch finish or better.
Click here to go to Machining Level II - EDM - Plunge COOL Snapshot page.

Machining Level II - EDM - Plunge. Level II machining skills are used by skilled tradespersons who have achieved proficiency in the core competencies of Machining Skills Level I and have advanced to higher levels of technical competency or have developed new competencies. The general areas of competency remain: bench skills, metal cutting skills, inspection and quality assurance skills. Level II machining skills apply to both single-part and multiple-part production. A person who has achieved Level II machining skills competency has no direct supervision responsibilities for other operators or production workers. However, people who have achieved Level II competence will occasionally provide training for beginning machining technicians. Candidates must complete a performance evaluation, which states: Given a print, process plan, select proper electrode material and produce electrode. Select proper workholding devices, EDM fluids, and plunge EDM machine. Perform the EDM operation called out on the process plan.
Click here to go to Machining Level I - Manual Milling Skills I COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part.  There is only one project for the candidate to complete for each Machining Level I skill area.  Some skill areas encompass two or more performance requirements.  One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).
Click here to go to Machining Level I - Turning Operations: Turning Chucking Skills COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part.  There is only one project for the candidate to complete for each Machining Level I skill area.  Some skill areas encompass two or more performance requirements.  One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).
Click here to go to Machining Level I - Turning Operations: Turning Between Centers COOL Snapshot page.

The Machining Level I certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Vertical Milling, Drill Press, Surface Grinding, Turning - Between Centers, Turning-Chucking, CNC Milling, and CNC Turning.  Earning a NIMS certification requires the successful completion of both a performance and written examination. The performance exam will be the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part. There are performance assessment requirements for all skill cluster areas except Measurement, Materials, & Safety Skills. One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).

Click here to go to Machining Level I - Grinding Skills I COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part.  There is only one project for the candidate to complete for each Machining Level I skill area.  Some skill areas encompass two or more performance requirements.  One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).
Click here to go to Machining Level I - CNC Lathe Programming Setup & Operations COOL Snapshot page.

Renewal Period: Lifetime

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part.  There is only one project for the candidate to complete for each Machining Level I skill area.  Some skill areas encompass two or more performance requirements.  One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).
Click here to go to Machining Level I - CNC Milling: Programming Setup & Operations COOL Snapshot page.

Renewal Period: Lifetime

The NIMS Machining Level I - CNC Milling: Programming Setup & Operations certification is an entry-level machinist certification. Achieving a NIMS credential is a means through which an individual involved or interested in metalforming can prove their abilities to themselves, to their instructors or employers and to the customer.
Click here to go to Machining Level I - CNC Lathe Operations COOL Snapshot page.

The Machining Level 1 certification identifies and recognizes Machinists with skills applicable to the specific metalworking process and level of competency. Machining Level I certifications are offered in nine different machining skill cluster areas, each of which allows an individual to focus on skill sets that are most important to their job or career objectives. These skill cluster areas are Job Planning, Benchwork, and Layout, Measurement, Materials, and Safety, Vertical Milling, Drill Press, Surface Grinding, Turning – Between Centers, Turning-Chucking, CNC Milling, and CNC Turning. Earning a NIMS certification requires the successful completion of both a performance assessment and written examination. The performance assessment will include the manufacturing of a part, the set-up and operation of a machine or the writing of a program that will manufacture a specific part.  There is only one project for the candidate to complete for each Machining Level I skill area.  Some skill areas encompass two or more performance requirements.  One written exam is available for both Turning skill cluster areas (each turning area has a separate performance assessment).
Click here to go to Machining Level I - CNC Milling: Operations COOL Snapshot page.

The NIMS Machining Level I - CNC Milling: Operations certification is an entry-level machinist certification. Achieving a NIMS credential is a means through which an individual involved or interested in CNC milling can prove their abilities to themselves, to their instructors or employers and to the customer.
Click here to go to Machining Level II - Cylindrical Grinding Skills COOL Snapshot page.

The National Institute for Metalworking Skills (NIMS) credentials are earned by students, trainees, apprentices, employees, and military personnel. By earning NIMS credentials, these individuals demonstrate that their skills meet industry established standards.
Click here to go to Certified Hazardous Materials Manager (CHMM) COOL Snapshot page.

Renewal Period: 5 years

The Institute of Hazardous Materials Management (IHMM), Certified Hazardous Material Manager (CHMM) certification demonstrates a professional's ability to handle, manage, or advise others on hazardous materials in a safe and compliant manner. A CHMM may work for a corporation, business, government, or in a related field associated with hazardous materials such as environmental protection, safety, hazmat transportation, or security.  Candidates must have a minimum of a Bachelor’s degree from an accredited college or university and four years of relevant work experience.  Candidates must also pass a written exam.

Click here to go to Commercial Driver's License (CDL) COOL Snapshot page.

The United States Department of Transportation, Federal Motor Carrier Safety Administration (FMCSA), Commercial Driver's License (CDL) is for individuals who drive certain Commercial Motor Vehicles (CMVs). There are three classes of CDLs with endorsements for specialized qualifications for vehicles like school buses, tank trucks, and tractor trailers. The U.S. Department of Transportation requires drivers to obtain and hold a CDL if they operate in interstate, intrastate, or foreign commerce and drive a vehicle that meets one or more of the classifications of a CMV described on the FMSCA website. FMSCA has developed and issued standards for state testing and licensing of CDL holders. These standards require state governments to issue CDLs to certain CMV drivers only after the driver passes knowledge and skills testing that is administered by the state and related to the type of vehicle the driver expects to operate.
Click here to go to Certified Maintenance and Reliability Professionals (CMRP) COOL Snapshot page.

Renewal Period: 3 years

The Society for Maintenance and Reliability Professional (SMRP), Certified Maintenance and Reliability Professional (CMRP) is a certification for maintenance, reliability and physical asset management professionals. CMRP candidates should possess aptitude in the following areas: business and management, equipment reliability, manufacturing process reliability, organization and leadership, and work management. There are no experience or education eligibility requirements. Candidates must pass a written exam.
Click here to go to Certified Maintenance and Reliability Technician (CMRT) COOL Snapshot page.

Renewal Period: 3 years

The Society for Maintenance and Reliability Professionals (SMRP), Certified Maintenance and Reliability Technician (CMRT) is a certification for maintenance and reliability technicians who are responsible for preventative, predictive and corrective maintenance. CMRT candidates should possess aptitude in the following areas: maintenance practices, preventative and predictive maintenance, troubleshooting and analysis, and corrective maintenance. There are no experience or education eligibility requirements. Candidates must pass a written exam.
Click here to go to Metalforming Skills - Level I COOL Snapshot page.

The NIMS Metalforming Skills - Level I certification is an entry-level machinist certification. Achieving a NIMS credential is a means through which an individual involved or interested in metalforming can prove their abilities to themselves, to their instructors or employers and to the customer.
Click here to go to Machining Level II - Surface Grinding Skills COOL Snapshot page.

Machining Level II - Surface Grinding Skills. Level II machining skills are used by skilled tradespersons who have achieved proficiency in the core competencies of Machining Skills Level I and have advanced to higher levels of technical competency or have developed new competencies. The general areas of competency remain: bench skills, metal cutting skills, inspection and quality assurance skills. Level II machining skills apply to both single-part and multiple-part production. A person who has achieved Level II machining skills competency has no direct supervision responsibilities for other operators or production workers. However, people who have achieved Level II competence will occasionally provide training for beginning machining technicians. Candidates must complete a performance evaluation.
Click here to go to Associate Safety Professional (ASP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Associate Safety Professional (ASP) certification validates an individual's knowledge and experience in the safety profession. ASP certifies an individual's ability to perform at least 50% of professional-level safety duties in safety, health, environment, and ergonomics. Safety professionals are required to make worksite assessments to determine risks, potential hazards and controls, evaluate risks and hazard control measures for equipment, systems, facilities, and processes, investigate incidents, maintain and evaluate incident and loss records, and prepare emergency response plans. ASP candidates must meet a combination of education and experience requirements. Candidates must take a written exam.
Click here to go to Machining Level II - Turning II - Between Centers COOL Snapshot page.

Credential description coming soon.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Automotive Body and Related Repairers
Click here for the external link to: My Next Move salary info for Automotive Body and Related Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Automotive Body and Related Repairers

Click here for the external link to: My Next Move for Veterans - Computer-Controlled Machine Tool Operators, Metal and Plastic
Click here for the external link to: My Next Move salary info for Computer-Controlled Machine Tool Operators, Metal and Plastic

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Computer-Controlled Machine Tool Operators, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
Click here for the external link to: My Next Move salary info for Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Click here for the external link to: My Next Move salary info for Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - Heavy and Tractor-Trailer Truck Drivers
Click here for the external link to: My Next Move salary info for Heavy and Tractor-Trailer Truck Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Heavy and Tractor-Trailer Truck Drivers

Click here for the external link to: My Next Move for Veterans - Industrial Machinery Mechanics
Click here for the external link to: My Next Move salary info for Industrial Machinery Mechanics

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Industrial Machinery Mechanics

Click here for the external link to: My Next Move for Veterans - Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Click here for the external link to: My Next Move salary info for Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Layout Workers, Metal and Plastic
Click here for the external link to: My Next Move salary info for Layout Workers, Metal and Plastic

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Layout Workers, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Light Truck or Delivery Services Drivers
Click here for the external link to: My Next Move salary info for Light Truck or Delivery Services Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Light Truck or Delivery Services Drivers

Click here for the external link to: My Next Move for Veterans - Machinists
Click here for the external link to: My Next Move salary info for Machinists

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Machinists

Click here for the external link to: My Next Move for Veterans - Maintenance and Repair Workers, General
Click here for the external link to: My Next Move salary info for Maintenance and Repair Workers, General

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Maintenance and Repair Workers, General

Click here for the external link to: My Next Move for Veterans - Maintenance Workers, Machinery
Click here for the external link to: My Next Move salary info for Maintenance Workers, Machinery

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Maintenance Workers, Machinery

Click here for the external link to: My Next Move for Veterans - Mobile Heavy Equipment Mechanics, Except Engines
Click here for the external link to: My Next Move salary info for Mobile Heavy Equipment Mechanics, Except Engines

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Mobile Heavy Equipment Mechanics, Except Engines

Click here for the external link to: My Next Move for Veterans - Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic
Click here for the external link to: My Next Move salary info for Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Click here for the external link to: My Next Move for Veterans - Non-Destructive Testing Specialists
Click here for the external link to: My Next Move salary info for Non-Destructive Testing Specialists

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Non-Destructive Testing Specialists

Click here for the external link to: My Next Move for Veterans - Sheet Metal Workers
Click here for the external link to: My Next Move salary info for Sheet Metal Workers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Sheet Metal Workers

Click here for the external link to: My Next Move for Veterans - Solderers and Brazers
Click here for the external link to: My Next Move salary info for Solderers and Brazers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Solderers and Brazers

Click here for the external link to: My Next Move for Veterans - Structural Metal Fabricators and Fitters
Click here for the external link to: My Next Move salary info for Structural Metal Fabricators and Fitters

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Structural Metal Fabricators and Fitters

Click here for the external link to: My Next Move for Veterans - Welders, Cutters, and Welder Fitters
Click here for the external link to: My Next Move salary info for Welders, Cutters, and Welder Fitters

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Welders, Cutters, and Welder Fitters

Click here for the external link to: My Next Move for Veterans - Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
Click here for the external link to: My Next Move salary info for Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders

This credential has been accredited by:
This credential has been accredited by: