MOS 14E PATRIOT Fire Control Enhanced Operator/Maintainer

MOS Description

The PATRIOT fire control enhanced operator/maintainer supervises or serves in an air defense unit or as a member of an air defense activity engaged in operations or intelligence functions of liaison units. Responsible for system emplacement, initialization, and operator/organizational level system maintenance and services, (limited to the ability to detect improper equipment operation or malfunction by use of the senses, embedded diagnostic aids; e.g., BIT/BITE and/or on-board test equipment, Test Measurement and Diagnostic Equipment (TMDE) (e.g., multimeter to perform low voltage and continuity checks), technical references, technical inspections, adjustments, removal and replacement of battery replaceable units/line-replaceable units (BRUs/LRUs), and other tasks authorized in the maintenance allocation chart (MAC), and preventive maintenance checks and services (PMCS) required to sustain or return the PATRIOT Fire Control Section (FCS), Fire Direction Section (FDS), and associated equipment to its operational readiness condition. Performs Battle Damage Assessment Repair (BDAR), near-real time status reporting, report generation, and system deployment. Evaluates target data and identifies and engages targets. For more information on MOS 14E, see this Army website.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Top
This is an official U.S. Army websiteUpdated: August 31, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

Promo Points

This credential has been approved for promotion points. Click for more information.   Click to go to related promotion points site.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Certified Safety Professional (CSP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Certified Safety Professional (CSP) is an intermediate-level credential for professionals who support workplace safety practices. CSPs conduct worksite assessments, determine risk, measure hazards and controls, evaluate risk and hazard control measures, investigate incidents, maintain incident and loss records, and prepare emergency response plans. CSP candidates must meet experiential requirements that relate to the field of workplace safety. Candidates must pass a written exam.
Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) is designed for technicians who have less than two years of experience or training in electronics. The CETa is the foundation for ETA’s journeyman, senior, and master specialty, and master certification programs. CETa applicants must meet the experience or training requirement and pass a written exam.
Click here to go to Computer Service Technician (CST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Computer Service Technician (CST) is an entry-level credential for professionals who supply computer support. The CST exam assesses candidates’ skills in performing hardware servicing and system software skills for personal computers (PCs). CST candidates should have knowledge of PC components, operating systems, basic networking, troubleshooting, and safety procedures. Candidates must pass a written exam.
Click here to go to RADAR Electronics Technician (RAD) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), RADAR Electronics Technician (RAD) is a journeyman-level certification recommended for radar electronics technicians with knowledge of radar basics and concepts applicable to all types of avionics, maritime and land systems. RADAR Electronics Technicians must be knowledgeable and have abilities in the following technical and human relations areas: Block Diagrams and Schematics, Components, Cabling and Antennas, Hand Tools & Soldering, Mathematics, Amplifiers, RADAR Transceivers, Interfacing, Satellite, Wireless, and Data Communications, Computers and Digital Concepts, Software Programming, Troubleshooting, and People Relations. Candidates must hold the Associate Electronics Technician (CETa) certification prior to taking the RADAR exam. Individuals with a valid FCC Element 8, and either the ETA Associate CET (CETa) or a Journeyman (CET) certification, are eligible for a rollover to an ETA RADAR certification. Candidates must take a written exam.
Click here to go to Network Systems Technician (NST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Network Systems Technician (NST) certification is for a network professional who has knowledge of computer network basic concepts, which are applicable to all the various specialty areas of the computer industry. The NST must be familiar with the following knowledge areas: Computer Network Terminology, Network Administration, Wide Area Networks and Devices Used to Extend Networks, Network Architectures, Computer Network Topologies and Classifications, Network Services, Network Operations, Network Standards, Troubleshooting LAN/WAN Test Equipment, Network Server and Workstation Computer System Hardware, Network Operating Systems, and Disaster and Security Planning for Networks. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Associate-Level (Associate CET) COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level (Associate CET), is an entry-level certification for technicians and students with under four years of experience and validates the technician’s knowledge of basic electronics, including math, DC and AC circuts, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Communications COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians, Certified Electronics Technician - Journeyman-Level - Communications credential is for technicians working in the electronics field. Candidates must demonstrate knowledge of two-way transceivers and how to service them. Candidates also must understand communication theory, transmitters, deviation, sensitivity, quieting, and troubleshooting. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Computer COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians, Certified Electronics Technician - Journeyman-Level - Computers credential is for technicians working in the field of electronics. Candidates must demonstrate an understanding of computer systems and hardware and must show proficiency in basic arithmetic and logic operations as they relate to computer theory, computer organization, memory and storage, and input and output equipment. The technician should have some knowledge of software and programming, and be able to explain troubleshooting procedures. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Industrial COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Journeyman-Level – Industrial credential is for technicians working in the electronics field. Candidates must demonstrate knowledge of characteristics and applications of industrial electronic components, and the operation of devices such as triacs, SCRs, diacs, and Shockley diodes. In addition, candidates must understand transducers, transistors and op-amps operations, single-phase and three-phase control systems, motors, PLCs, and industrial electronics safety and hydraulic and pneumatic systems. Candidates must pass a written exam.

Click here to go to Certified Electronics Technician - Journeyman-Level - Radar COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician -Journeyman-Level – Radar credential validates the technician’s general knowledge of both continuous wave and pulse radar operation. Candidates must know about transmitters and receivers, antennas, transmission lines and their characteristics and CRT display systems and their power supplies. Candidates must pass a written exam.
Click here to go to Certified Mapping Scientist, GIS/LIS (ASPRS) COOL Snapshot page.

Renewal Period: 5 years

The Imaging & Geospatial Information Society (ASPRS), Certified Mapping Scientist, GIS/LIS certification is for professionals involved in GIS/LIS systems design and/or systems application of data base management and computer programs to solve user analysis requirements with spatially referenced databases. The Certified Mapping Scientist GIS/LIS leads the data needs integration and the correspondence between and the utilization of various spatial systems used to solve requirements. Candidates must meet experience requirements and must pass a written exam.

Click here to go to Certified Mapping Scientist, Remote Sensing (ASPRS) COOL Snapshot page.

Renewal Period: 5 years

The Imaging & Geospatial Information Society (ASPRS), Certified Mapping Scientist, Remote Sensing is for professionals who use visual or computer-assisted technology to analyze images acquired from aircraft, satellites, ground bases, or platforms. These analyses are used in the study of temporal changes, natural resources, and for land use planning. Candidates must meet experience requirements and must pass a written exam.

Click here to go to Certified Risk Manager (CRM) COOL Snapshot page.

Credential description coming soon.
Click here to go to Check Point Certified Security Administrator (CCSA) COOL Snapshot page.

The Check Point Certified Security Administrator (CCSA) certification is an intermediate-level credential for individuals candidates pursuing a career in cybersecurity. CCSA candidates install security gateways in distributed environments, configure rules on servers, assign permissions, schedule backups and upgrades with minimal downtime, and monitor and troubleshoot IPS and common network traffic. CCSA candidates must have basic knowledge of networking, Windows Server or UNIX skills, internet and TCP/IP experience and satisfy prerequisites. Candidates are required to pass an exam.
Click here to go to Check Point Certified Security Expert (CCSE) COOL Snapshot page.

Credential description coming soon.
Click here to go to Certified Transportation Professional (CTP) COOL Snapshot page.

Renewal Period: 3 years

The National Private Truck Council (NPTC), Certified Transportation Professional (CTP) is for professionals with the experience and knowledge to direct and administer a private fleet, traffic, or transportation operation. CPTs understand complex operational and regulatory issues, can identify and evaluate potential costs and savings, and develop systems and practices that best meet transportation objectives and needs. CTPs demonstrate knowledge in the areas of finance, operations, safety, human resources, and vehicle and equipment maintenance. Candidates must pass a written exam.
Click here to go to Commercial Driver's License (CDL) COOL Snapshot page.

The United States Department of Transportation, Federal Motor Carrier Safety Administration (FMCSA), Commercial Driver's License (CDL) is for individuals who drive certain Commercial Motor Vehicles (CMVs). There are three classes of CDLs with endorsements for specialized qualifications for vehicles like school buses, tank trucks, and tractor trailers. The U.S. Department of Transportation requires drivers to obtain and hold a CDL if they operate in interstate, intrastate, or foreign commerce and drive a vehicle that meets one or more of the classifications of a CMV described on the FMSCA website. FMSCA has developed and issued standards for state testing and licensing of CDL holders. These standards require state governments to issue CDLs to certain CMV drivers only after the driver passes knowledge and skills testing that is administered by the state and related to the type of vehicle the driver expects to operate.
Click here to go to Associate Engineering Technologist (AT) COOL Snapshot page.

The Associate Engineering Technologist (AT) certification is intended for individuals who have graduated from an engineering technology bachelor's degree program accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology (TAC/ABET). An engineering degree will NOT be considered as a substitute for a program from an accredited school. The Associate Engineering Technologist (AT) grade is available upon graduation, No work experience is required for certification at the AT grade.
Click here to go to Associate Safety Professional (ASP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Associate Safety Professional (ASP) certification validates an individual's knowledge and experience in the safety profession. ASP certifies an individual's ability to perform at least 50% of professional-level safety duties in safety, health, environment, and ergonomics. Safety professionals are required to make worksite assessments to determine risks, potential hazards and controls, evaluate risks and hazard control measures for equipment, systems, facilities, and processes, investigate incidents, maintain and evaluate incident and loss records, and prepare emergency response plans. ASP candidates must meet a combination of education and experience requirements. Candidates must take a written exam.
Click here to go to GIAC Certified Project Manager Certification (GCPM) COOL Snapshot page.

The Global Information Assurance Certification (GIAC), Certified Project Manager Certification (GCPM) is a mid-level certification designed for security professionals, project leads, and managers. The GCPM demonstrates an understanding of and the ability to lead project teams, technical project management methodology, and its implementation. The GCPM affirms the critical skill sets associated with making projects successful, including effective communication, time, cost, quality, procurement and risk management of IT projects and application development. There is no specific training required for the GCPM. Candidates must pass a written exam.
Click here to go to Gaming and Vending Technician (GVT) COOL Snapshot page.

The ETA-i Gaming and Vending Technician (GVT) certification an entry-level credential for technicians with a sound background in electronics. GVTs work in the field to troubleshoot, repair and calibrate gaming and vending type equipment. Money handling, basic electrical, circuitry, computer hardware and software, and safety are topics included in this certification.
Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various electrical and electronics concepts, electronic measurement equipment, electronic components, circuitry, and other related subjects specific to direct current (DC) electronics. The EM1 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate AC (EM2) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of AC, safety, cabling, and other procedures. The EM2 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Certification in Risk Management Assurance (CRMA) COOL Snapshot page.

The IIA Certification in Risk Management Assurance (CRMA) is an intermediate-level internal auditor and risk management professional credential. CRMAs are responsible for and have experience in providing risk assurance, developing governance processes, delivering quality assurance or control self-assessment (CSA). Candidates for the CRMA must meet educational, experiential, and other requirements.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Cartographers and Photogrammetrists
Click here for the external link to: My Next Move salary info for Cartographers and Photogrammetrists

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Cartographers and Photogrammetrists

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - Heavy and Tractor-Trailer Truck Drivers
Click here for the external link to: My Next Move salary info for Heavy and Tractor-Trailer Truck Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Heavy and Tractor-Trailer Truck Drivers

Click here for the external link to: My Next Move for Veterans - Light Truck or Delivery Services Drivers
Click here for the external link to: My Next Move salary info for Light Truck or Delivery Services Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Light Truck or Delivery Services Drivers

Click here for the external link to: My Next Move for Veterans - Mapping Technicians
Click here for the external link to: My Next Move salary info for Mapping Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Mapping Technicians

Click here for the external link to: My Next Move for Veterans - Operating Engineers and Other Construction Equipment Operators
Click here for the external link to: My Next Move salary info for Operating Engineers and Other Construction Equipment Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Operating Engineers and Other Construction Equipment Operators

Click here for the external link to: My Next Move for Veterans - Surveyors
Click here for the external link to: My Next Move salary info for Surveyors

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Surveyors

This credential has been accredited by:
This credential has been accredited by: