MOS 12P Prime Power Production Specialist

MOS Description

The prime power production specialist performs electrical assessments, facilities maintenance, QA/QC operations: supervises, operates, installs and performs DS/GS level maintenance on electric power plants, consisting of prime power generator sets of 500 KW and higher; and associated auxiliary systems and equipment. Other duties include LNO and technical advisor to FEMA and other federal organizations.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Additional information pertaining to MOS 12P Prime Power Production Specialist can be found below.

NAMO

The 249th Engineer Battalion (Prime Power) has partnered with the International Electrical Testing Association (NETA) to create NETA Accredited Military Organization(s) (NAMO), which enables 12P Soldiers to earn Level II / III / IV certifications as Electrical Testing Technicians.

Top
This is an official U.S. Army websiteUpdated: August 31, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

Promo Points

This credential has been approved for promotion points. Click for more information.   Click to go to related promotion points site.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Certified Professional Constructor (CPC) COOL Snapshot page.

Renewal Period: 2 years

The American Institute of Constructors (AIC), Certified Professional Constructor (CPC) credential is the highest level of certification in AIC's Constructor Certification Program and is recommended for individuals with established constructors who have several years of project oversight experience. Candidates must have several years of both qualifying and leadership experience in executing construction work to be eligible for the CPC certification. Candidates must pass a written exam.

Click here to go to Certified Hazardous Materials Manager (CHMM) COOL Snapshot page.

Renewal Period: 5 years

The Institute of Hazardous Materials Management (IHMM), Certified Hazardous Material Manager (CHMM) certification demonstrates a professional's ability to handle, manage, or advise others on hazardous materials in a safe and compliant manner. A CHMM may work for a corporation, business, government, or in a related field associated with hazardous materials such as environmental protection, safety, hazmat transportation, or security.  Candidates must have a minimum of a Bachelor’s degree from an accredited college or university and four years of relevant work experience.  Candidates must also pass a written exam.

Click here to go to Construction Documents Technologist (CDT) COOL Snapshot page.

Renewal Period: 3 years

The Construction Specifications Institute (CSI), Construction Documents Technologist (CDT) is an entry-level certification. The CDT is a prerequisite to CSI's other certification offerings. The CDT allows candidates to demonstrate knowledge of the construction process, contractual relationships, and construction documents. To earn a CDT certification, candidates must have a high school diploma/GED and pass an exam.
Click here to go to Certified Construction Contract Administrator (CCCA) COOL Snapshot page.

Renewal Period: 3 years

The Construction Specifications Institute (CSI), Certified Construction Contract Administrator (CCCA) is an intermediate-level certification. The CCCA is for candidates who can demonstrate their knowledge in all facets of the construction process and contractual relationships, as well as construction contract administration. A CCCA is an individual who can complete tasks in the areas of quality control, bidding and negotiating, construction inspections, and enforcement and liability. To earn a CCCA certification, candidates must have experience in the field and be able to pass an exam.
Click here to go to Certified Facility Manager (CFM) COOL Snapshot page.

Renewal Period: 3 years

The International Facility Management Association (IFMA), Certified Facility Manager (CFM) credential credential sets the industry standard for practicing facility managers and validates a manager’s ability and skill in 11 competencies of the facility management body of knowledge. CFM work varies widely, depending on facility size, industry, purpose, location and whether the CFM manages one or multiple facilities. Candidates must meet a combination of education and experience requirements. Candidates must pass a written exam.

Click here to go to Certified Environmental Professional (CEP) COOL Snapshot page.

The Academy of Board Certified Environmental Professionals (ABCEP), Certified Environmental Professional (CEP) is an interdisciplinary credential for middle and senior level environmental professionals, typically with seven to ten years of experience. CEPs perform in such roles as federal, state, local agency staff, researchers, consultants, compliance managers, activists, and enforcement officials. CEPs are certified across the areas of environmental assessment, documentation, operations, planning, sustainability, research, and education. Candidates must meet a combination of experience and education requirements. 

Click here to go to Certified Environmental Auditor (CEA) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Certified Environmental Auditor (CEA) is for professionals conducting environmental compliance and risk audits of operating facilities, related equipment and ongoing procedures. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Certified Environmental Systems Manager (CESM) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Certified Environmental Systems Manager (CESM) is for professionals responsible for the implementation of environmental management systems (EMS) programs for operating facilities in accordance with ISO 14001-type guidelines and principles. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Registered Environmental Manager (REM) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Registered Environmental Manager (REM) is for professionals who possess the skills/knowledge to coordinate and manage major environmental health and safety (EH&S) projects and programs; including environmental auditing, hazardous materials management/transportation and environmental real estate assessment. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Certified Construction Manager (CCM) COOL Snapshot page.

Renewal Period: 3 years

The Construction Manager Certification Institute (CMCI), Certified Construction Manager (CCM) is an intermediate level certification. The CCM is aimed at construction professionals who manage entire projects and programs using pre-planning, design, construction, close out and management expertise. CCMs assure the best possible project outcome no matter what type of project delivery method is used. Candidates must meet experience and other requirements. Candidates must pass a written examination.
Click here to go to Practice of Geology Examination (PG) COOL Snapshot page.

Credential description coming soon.
Click here to go to Associate Constructor (AC) COOL Snapshot page.

Renewal Period: 2 years

The American Institute of Constructors (AIC), Associate Constructor (AC) certification is the first-level certification in AIC's Constructor Certification Program and is recommended for recent graduates of four-year Construction Management programs or those transitioning into construction management from other industries. Candidates must meet the minimum education and/or experience requirements. Candidates must pass a written exam.
Click here to go to Certified Hazardous Materials Practitioner (CHMP) COOL Snapshot page.

Renewal Period: 5 years

The Institute for Hazardous Materials Management (IHMM), Certified Hazardous Materials Practitioner (CHMP) certification is a standard of proficiency for front-line hazardous materials workers. The CHMP is intended to enhance regulatory compliance, safety, and overall credibility of operations, and provide recognition to individuals who meet its rigorous requirements. Candidates must meet a combination of education and/or experience requirements and pass a written exam.

 

Click here to go to LEED Green Associate COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED Green Associate credential is for individuals new to green building as well as product manufacturers, students, real estate professionals and contractors. LEED Green Associates have general knowledge of green building practices and know how to support other professionals working on LEED projects. GBCI recommends that candidates have exposure to LEED and green building concepts through educational courses, volunteering or work experience. To earn the LEED Green Associate credential, candidates must pass a written exam.
Click here to go to LEED AP Operations + Maintenance (LEED AP O+M) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Operations + Maintenance (LEED AP O+M) credential is for professionals implementing sustainable practices, improving performance, heightening efficiency and reducing environmental impact in existing buildings through enhanced operations and maintenance. LEED AP O+M candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Homes COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Homes is for individuals involved in the design and construction of healthy, durable homes that use fewer resources and produce less waste. LEED AP Homes candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Building Design + Construction (LEED AP BD+C) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Building Design + Construction (LEED AP BD+C) credential is for professionals with expertise in the design and construction phases of green buildings, serving the commercial, residential, education and healthcare sectors. LEED AP BD+C candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Interior Design + Construction (LEED AP ID+C) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Interior Design + Construction (LEED AP ID+C) credential is for individuals who participate in the design, construction and improvement of commercial interiors and tenant spaces that offer a healthy, sustainable and productive work environment. LEED AP ID + C candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Neighborhood Development (LEED AP ND) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Neighborhood Development (LEED AP ND) credential is for individuals participating in the planning, design and development of walkable, neighborhoods and communities. LEED AP ND candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to Certified Environmental Scientist (CES) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Certified Environmental Scientist (CES) is for professionals who possess an understanding of the basic principles of environmental science, including chemistry, physics, earth science, biology, meteorology, zoology and environmental health. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Fundamentals of Engineering (FE) Exam - Industrial and Systems COOL Snapshot page.

Credential description coming soon.
Click here to go to Landscape Architect Registration Examination (LARE) COOL Snapshot page.

The American Society of Landscape Architects (ASLA), Landscape Architect Registration Examination (LARE) is an intermediate-level credential for professional landscape architects. Landscape Architects plan and design land areas for projects such as parks and other recreational facilities, airports, highways, hospitals, schools, land subdivisions, and commercial, industrial, and residential sites. There are several sections to the exam that assess candidates' knowledge, skills, and abilities in the areas of protecting public health, safety, and welfare. Candidates for the LARE credential must meet educational and experiential requirements.
Click here to go to Certified Electronics Technician - Associate-Level (Associate CET) COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level (Associate CET), is an entry-level certification for technicians and students with under four years of experience and validates the technician’s knowledge of basic electronics, including math, DC and AC circuts, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.
Click here to go to Certified Energy Manager (CEM) COOL Snapshot page.

Renewal Period: 3 years

The Certified Energy Manager (CEM) credential recognizes professionals in the energy management field who have demonstrated high levels of experience, competence, proficiency, and ethical fitness in the energy management profession. Candidates must meet one of the specified education and or experience requirements to sit for the exam. All CEM candidates must attend a preparatory CEM training seminar, and complete and pass a four-hour written, open-book examination.
Click here to go to Fundamentals of Surveying (FS) Exam COOL Snapshot page.

Credential description coming soon.
Click here to go to Fundamentals of Geology Examination (FG) COOL Snapshot page.

Credential description coming soon.
Click here to go to Electronic Diesel Engine Diagnosis Specialist (L2) COOL Snapshot page.

Renewal Period: 5 years

The National Institute for Automotive Service Excellence (ASE), Electronic Diesel Engine Diagnosis Specialist (L2) certification is for technicians who possess knowledge of the skills necessary to diagnose sophisticated diesel engine performance problems on medium- and heavy-duty trucks. To earn the Electronic Diesel Engine Diagnosis Specialist (L2) certification, candidates must have passed one of the ASE Diesel Engine tests (A9, H2, S2, or T2) and one of the ASE Electrical/Electronic Systems tests (A6, H6, S6 or T6), have three years of relevant work experience, and pass a written exam.
Click here to go to Electrical Power Testing - Level I COOL Snapshot page.

Renewal Period: 3 years

The National Institute for Certification in Engineering Technologies (NICET), Electrical Power Testing - Level I credential is an entry-level certification for electrical technicians who test equipment used in the production, transmission, and distribution of electrical power. The certification validates a technician’s knowledge required to inspect, test, and maintain electrical power equipment. Electrical Power Testing - Level I technicians work under the supervision of a higher-level technician and perform duties such as isolating and ground power equipment safely, connecting test equipment, and conducting and documenting standard tests of basic single-function equipment. Candidates must meet experience requirements and pass a written exam.

Click here to go to Electrical Power Testing - Level II COOL Snapshot page.

Renewal Period: 3 years

The National Institute for Certification in Engineering Technologies (NICET), Electrical Power Testing - Level II credential is a mid-level certification for electrical technicians who test equipment used in the production, transmission, and distribution of electrical power. The certification validates knowledge required to inspect, test and maintain electrical power equipment. Electrical Power Testing - Level II technicians work under general supervision and perform duties including, isolate and ground power equipment safely; connect test equipment; and conduct and document standard tests of basic (single-function) equipment. Candidates must meet experience requirements and pass a written exam.
Click here to go to Electrical Power Testing - Level III COOL Snapshot page.

Renewal Period: 3 years

The National Institute for Certification in Engineering Technologies (NICET), Electrical Power Testing - Level III certification is an intermediate-level credential designed for technicians who inspect, test and maintain equipment used in the production, transmission, and distribution of electrical power. Electrical Power Testing - Level III technicians manage switching procedures, perform tests of complex equipment, analyze test and equipment data, plan work and manage teams. Candidates must meet experience requirements and pass a written exam.

Click here to go to Digger Derrick Operator COOL Snapshot page.

Renewal Period: 5 years

The National Commission for the Certification of Crane Operators (NCCCO), Digger Derrick Operator is for those who directly control the digger derrick functions. The digger derrick is often used by utilities and electrical contractors and is mostly equipped with digging auger and devices used to lift and stabilize a pole during installation. They can be used for light and sign installation, general construction and telecommunications. The operator is responsible for safely and competently planning work tasks, evaluating which equipment should be used for each task, positioning, setting up and operating equipment. Candidates must pass both a written and practical exam.

Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) is designed for technicians who have less than two years of experience or training in electronics. The CETa is the foundation for ETA’s journeyman, senior, and master specialty, and master certification programs. CETa applicants must meet the experience or training requirement and pass a written exam.
Click here to go to Certified Construction Specifier (CCS) COOL Snapshot page.

Renewal Period: 3 years

The Construction Specifications Institute (CSI), Certified Construction Specifier (CCS) is an intermediate-level certification. The CCS allows candidates to demonstrate their knowledge of contractual relationships, document organization, and document preparation. A CCS is an individual who is able to administer a contract for construction according to CSI guidelines. The candidate would have an understanding of agreements, conditions of a contract, Division 01, as well as researching and sourcing products. To earn a CCS certification, candidates must have experience in the field and be able to pass an exam.
Click here to go to Commercial Driver's License (CDL) COOL Snapshot page.

The United States Department of Transportation, Federal Motor Carrier Safety Administration (FMCSA), Commercial Driver's License (CDL) is for individuals who drive certain Commercial Motor Vehicles (CMVs). There are three classes of CDLs with endorsements for specialized qualifications for vehicles like school buses, tank trucks, and tractor trailers. The U.S. Department of Transportation requires drivers to obtain and hold a CDL if they operate in interstate, intrastate, or foreign commerce and drive a vehicle that meets one or more of the classifications of a CMV described on the FMSCA website. FMSCA has developed and issued standards for state testing and licensing of CDL holders. These standards require state governments to issue CDLs to certain CMV drivers only after the driver passes knowledge and skills testing that is administered by the state and related to the type of vehicle the driver expects to operate.
Click here to go to Property Maintenance and Housing Inspector - 64 COOL Snapshot page.

Renewal Period: 3 years

The International Code Council (ICC), Property Maintenance and Housing Inspector - 64 certification is for professionals who determine whether all buildings and structures in a local jurisdiction are safe, sanitary and fit for occupation and use and meet minimum maintenance standards and conditions. Property Maintenance and Housing Inspectors apply these standards to basic utilities, heating facilities, equipment, light, ventilation, sanitation, and fire safety and are responsible for determining when buildings are unfit for human occupancy and use and for enforcing condemnation and demolition when needed. There are no prerequisite educational or experience requirements, but candidates must have technical knowledge and pass a written exam.     

Click here to go to Electrical Generator Systems Technician Certification - Journeyman COOL Snapshot page.

Renewal Period: 5 years

The Electrical Generating Systems Association (EGSA), Electrical Generator Systems Technician Certification - Journeyman is an intermediate-level certification that demonstrates an individual's knowledge of on-site power generation equipment and systems. Electrical Generator Systems Technician Journeymen have knowledge of electricity, mechanical, and electrical components and the interactions between them and are proficient in the installation, service, maintenance, and repair of on-site power generation systems. Candidate must meet experience eligibility requirements and pass an exam.
Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various electrical and electronics concepts, electronic measurement equipment, electronic components, circuitry, and other related subjects specific to direct current (DC) electronics. The EM1 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate AC (EM2) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of AC, safety, cabling, and other procedures. The EM2 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Analog (EM3) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Analog (EM3) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of diodes, transistors, thyristors, integrated circuits, optoelectronic devices, power supplies, basic test equipment and measurements, mathematics and formulas, amplifiers, and other related subjects. The EM3 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Comprehensive (EM5) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Comprehensive (EM5) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of soldering, desoldering, tools, electrical conductors, AC power distribution, circuit protection, circuit controls, generators, motors, interfacing of electronics products, and technician work procedures. The EM5 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electrical Generator Systems Technician Certification - Apprentice COOL Snapshot page.

Renewal Period: 3 years

The Electrical Generating Systems Association (EGSA), Electrical Generator Systems Technician Certification - Apprentice is an entry-level certification that demonstrates an individual's knowledge of on-site power generation equipment and systems. Electrical Generator Systems Technician Apprentices have knowledge of electricity, mechanical, and electrical components and the interactions between them and are proficient in the installation, service, maintenance, and repair of on-site power generation systems. There are no formal education or experience requirements, but candidates must pass a written exam.
Click here to go to Airport Rescue and Fire-Fighting Technician Master Level III COOL Snapshot page.

Credential description coming soon.
Click here to go to Reliability Operator Certification (RC) COOL Snapshot page.

The North American Electric Reliability Corporation (NERC), Reliability Operator Certification (RC) is an intermediate-level credential for professionals who operate bulk electric systems. System Operators monitor power flows, voltages and status of equipment on the transmission system, and ensure the safe and reliable operation of the bulk electric system. Candidates for the RC are expected to have knowledge of resource and demand balancing, transmission, emergency preparedness, contingency analysis and reliability, and managing communications and data. Candidates must pass a written exam.
Click here to go to Balancing, Interchange, and Transmission Operator Certification (BT) COOL Snapshot page.

Renewal Period: 3 years

The North American Electric Reliability Corporation (NERC), Balancing, Interchange, and Transmission System Operator Certification (BT) is an intermediate-level credential for professionals who operate bulk electric systems. System Operators monitor power flows, voltages and status of equipment on the transmission system, and ensure the safe and reliable operation of the bulk electric system. Candidates for the BT are expected to have knowledge of resource and demand balancing, transmission, emergency preparedness, contingency analysis and reliability, and managing communications and data.
Click here to go to Transmission Operator Certification (TO) COOL Snapshot page.

The North American Electric Reliability Corporation (NERC), Transmission System Operator Certification (TO) is an intermediate-level credential for professionals who operate bulk electric systems. System Operators monitor power flows, voltages and status of equipment on the transmission system, and ensure the safe and reliable operation of the bulk electric system. Candidates for the TO are expected to have knowledge of resource and demand balancing, transmission, emergency preparedness, contingency analysis and reliability, and managing communications and data.
Click here to go to Balancing and Interchange Certification (BI) COOL Snapshot page.

The North American Electric Reliability Corporation (NERC), Balancing and Interchange Operator Certification (BI) is an intermediate-level credential for professionals who operate bulk electric systems. System Operators monitor power flows, voltages and status of equipment on the transmission system, and ensure the safe and reliable operation of the bulk electric system. Candidates for the BI are expected to have knowledge of resource and demand balancing, transmission, emergency preparedness, contingency analysis and reliability, and managing communications and data.
Click here to go to Principles and Practice of Engineering (PE) Exam - Electrical and Computer COOL Snapshot page.

The National Council of Examiners for Engineering and Surveying (NCEES), Principles and Practice of Engineering (PE) Exam - Electrical and Computer tests for a minimum level of competency in electrical and computer engineering. It is designed for engineers who have gained a minimum of four years of post-college work experience in the discipline. Eligibility to sit for the exam varies and is determined by each licensing board.

Click here to go to Principles and Practice of Engineering (PE) Exam - Mechanical COOL Snapshot page.

The National Council of Examiners for Engineering and Surveying (NCEES), Principles and Practice of Engineering (PE) Exam - Mechanical tests for a minimum level of competency in mechanical engineering. It is designed for engineers who have gained a minimum of four years of post-college work experience in the discipline. Eligibility to sit for the exam varies and is determined by each licensing board.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Powerhouse, Substation, and Relay
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Powerhouse, Substation, and Relay

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical and Electronics Repairers, Powerhouse, Substation, and Relay

Click here for the external link to: My Next Move for Veterans - Electrical Engineers
Click here for the external link to: My Next Move salary info for Electrical Engineers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical Engineers

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - Heavy and Tractor-Trailer Truck Drivers
Click here for the external link to: My Next Move salary info for Heavy and Tractor-Trailer Truck Drivers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Heavy and Tractor-Trailer Truck Drivers

Click here for the external link to: My Next Move for Veterans - Power Distributors and Dispatchers
Click here for the external link to: My Next Move salary info for Power Distributors and Dispatchers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Power Distributors and Dispatchers

Click here for the external link to: My Next Move for Veterans - Power Plant Operators
Click here for the external link to: My Next Move salary info for Power Plant Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Power Plant Operators

Click here for the external link to: My Next Move for Veterans - Stationary Engineers and Boiler Operators
Click here for the external link to: My Next Move salary info for Stationary Engineers and Boiler Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Stationary Engineers and Boiler Operators

This credential has been accredited by:
This credential has been accredited by: