MOS 12A Engineer Senior Sergeant

MOS Description

The engineer senior sergeant inspects and advises on bridging, rafting, and river crossing operations. Supervises general engineering activities related to all construction and utility operations. Formulates and maintains construction schedules. Assist in supervision of troops in assault operations. Perform ground and aerial reconnaissance. Advises engineer staff section personnel in matters involving combat engineer operations. Assist engineering officer in construction planning, scheduling, and material estimating. Assist in the preparation of operation orders, standing operating procedures, and contingency plans. Coordinates with staff agencies for engineer operational and tactical support. Coordinates employment of engineer elements operating with infantry and armored units. Inspects construction sites and enforces job specification and safety standards. Collects, interprets, analyzes, evaluates, and disseminates intelligence data. Provides staff supervision and principal noncommissioned officer direction to units engaged in performing engineering missions. Inspects construction and training activities. Supervises performance of combat engineering missions.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

Continuing Education

Enlisted Soldiers and Warrant Officers can review Associate and Bachelor degrees in their assigned military discipline, technical field, or leadership to assist in a clear pathway to completing a degree.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Top
This is an official U.S. Army websiteUpdated: August 31, 2020

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Mandatory

This credential is mandatory for some Soldiers, see the Mandated Certifications tab for more information.

Proponent Funded

Indicates the credential may have funding through the MOS proponent. Some proponents offer credentialing opportunities in conjunction with military training and/or as part of MOS development beyond the training base. Click here for more information.

CA Eligible

This certification is eligible for CA.

Promo Points

This credential has been approved for promotion points. Click for more information.   Click to go to related promotion points site.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

Click here to go to Certified Hazardous Materials Manager (CHMM) COOL Snapshot page.

Renewal Period: 5 years

The Institute of Hazardous Materials Management (IHMM), Certified Hazardous Material Manager (CHMM) certification demonstrates a professional's ability to handle, manage, or advise others on hazardous materials in a safe and compliant manner. A CHMM may work for a corporation, business, government, or in a related field associated with hazardous materials such as environmental protection, safety, hazmat transportation, or security.  Candidates must have a minimum of a Bachelor’s degree from an accredited college or university and four years of relevant work experience.  Candidates must also pass a written exam.

Click here to go to Certified Construction Contract Administrator (CCCA) COOL Snapshot page.

Renewal Period: 3 years

The Construction Specifications Institute (CSI), Certified Construction Contract Administrator (CCCA) is an intermediate-level certification. The CCCA is for candidates who can demonstrate their knowledge in all facets of the construction process and contractual relationships, as well as construction contract administration. A CCCA is an individual who can complete tasks in the areas of quality control, bidding and negotiating, construction inspections, and enforcement and liability. To earn a CCCA certification, candidates must have experience in the field and be able to pass an exam.
Click here to go to Certified Energy Manager (CEM) COOL Snapshot page.

Renewal Period: 3 years

The Certified Energy Manager (CEM) credential recognizes professionals in the energy management field who have demonstrated high levels of experience, competence, proficiency, and ethical fitness in the energy management profession. Candidates must meet one of the specified education and or experience requirements to sit for the exam. All CEM candidates must attend a preparatory CEM training seminar, and complete and pass a four-hour written, open-book examination.
Click here to go to Certified Facility Manager (CFM) COOL Snapshot page.

Renewal Period: 3 years

The International Facility Management Association (IFMA), Certified Facility Manager (CFM) credential credential sets the industry standard for practicing facility managers and validates a manager’s ability and skill in 11 competencies of the facility management body of knowledge. CFM work varies widely, depending on facility size, industry, purpose, location and whether the CFM manages one or multiple facilities. Candidates must meet a combination of education and experience requirements. Candidates must pass a written exam.

Click here to go to Certified Environmental Professional (CEP) COOL Snapshot page.

The Academy of Board Certified Environmental Professionals (ABCEP), Certified Environmental Professional (CEP) is an interdisciplinary credential for middle and senior level environmental professionals, typically with seven to ten years of experience. CEPs perform in such roles as federal, state, local agency staff, researchers, consultants, compliance managers, activists, and enforcement officials. CEPs are certified across the areas of environmental assessment, documentation, operations, planning, sustainability, research, and education. Candidates must meet a combination of experience and education requirements. 

Click here to go to Certified Environmental Auditor (CEA) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Certified Environmental Auditor (CEA) is for professionals conducting environmental compliance and risk audits of operating facilities, related equipment and ongoing procedures. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Certified Environmental Systems Manager (CESM) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Certified Environmental Systems Manager (CESM) is for professionals responsible for the implementation of environmental management systems (EMS) programs for operating facilities in accordance with ISO 14001-type guidelines and principles. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Registered Environmental Manager (REM) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Registered Environmental Manager (REM) is for professionals who possess the skills/knowledge to coordinate and manage major environmental health and safety (EH&S) projects and programs; including environmental auditing, hazardous materials management/transportation and environmental real estate assessment. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Fundamentals of Geology Examination (FG) COOL Snapshot page.

Credential description coming soon.
Click here to go to Practice of Geology Examination (PG) COOL Snapshot page.

Credential description coming soon.
Click here to go to Associate Constructor (AC) COOL Snapshot page.

Renewal Period: 2 years

The American Institute of Constructors (AIC), Associate Constructor (AC) certification is the first-level certification in AIC's Constructor Certification Program and is recommended for recent graduates of four-year Construction Management programs or those transitioning into construction management from other industries. Candidates must meet the minimum education and/or experience requirements. Candidates must pass a written exam.
Click here to go to Certified Hazardous Materials Practitioner (CHMP) COOL Snapshot page.

Renewal Period: 5 years

The Institute for Hazardous Materials Management (IHMM), Certified Hazardous Materials Practitioner (CHMP) certification is a standard of proficiency for front-line hazardous materials workers. The CHMP is intended to enhance regulatory compliance, safety, and overall credibility of operations, and provide recognition to individuals who meet its rigorous requirements. Candidates must meet a combination of education and/or experience requirements and pass a written exam.

 

Click here to go to LEED Green Associate COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED Green Associate credential is for individuals new to green building as well as product manufacturers, students, real estate professionals and contractors. LEED Green Associates have general knowledge of green building practices and know how to support other professionals working on LEED projects. GBCI recommends that candidates have exposure to LEED and green building concepts through educational courses, volunteering or work experience. To earn the LEED Green Associate credential, candidates must pass a written exam.
Click here to go to LEED AP Operations + Maintenance (LEED AP O+M) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Operations + Maintenance (LEED AP O+M) credential is for professionals implementing sustainable practices, improving performance, heightening efficiency and reducing environmental impact in existing buildings through enhanced operations and maintenance. LEED AP O+M candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Homes COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Homes is for individuals involved in the design and construction of healthy, durable homes that use fewer resources and produce less waste. LEED AP Homes candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Building Design + Construction (LEED AP BD+C) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Building Design + Construction (LEED AP BD+C) credential is for professionals with expertise in the design and construction phases of green buildings, serving the commercial, residential, education and healthcare sectors. LEED AP BD+C candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Interior Design + Construction (LEED AP ID+C) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Interior Design + Construction (LEED AP ID+C) credential is for individuals who participate in the design, construction and improvement of commercial interiors and tenant spaces that offer a healthy, sustainable and productive work environment. LEED AP ID + C candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to LEED AP Neighborhood Development (LEED AP ND) COOL Snapshot page.

Renewal Period: 2 years

The Green Business Certification Inc. (GBCI), LEED AP Neighborhood Development (LEED AP ND) credential is for individuals participating in the planning, design and development of walkable, neighborhoods and communities. LEED AP ND candidates must be at least 18 years of age, hold a current LEED Green Associate credential, and pass a written exam. Prior LEED project experience is strongly recommended.
Click here to go to Certified Environmental Scientist (CES) COOL Snapshot page.

Renewal Period: 1 year

The National Registry of Environmental Professionals (NREP), Certified Environmental Scientist (CES) is for professionals who possess an understanding of the basic principles of environmental science, including chemistry, physics, earth science, biology, meteorology, zoology and environmental health. Candidates must meet academic and experience requirements. Candidates must pass a written exam.

Click here to go to Fundamentals of Engineering (FE) Exam - Industrial and Systems COOL Snapshot page.

Credential description coming soon.
Click here to go to Landscape Architect Registration Examination (LARE) COOL Snapshot page.

The American Society of Landscape Architects (ASLA), Landscape Architect Registration Examination (LARE) is an intermediate-level credential for professional landscape architects. Landscape Architects plan and design land areas for projects such as parks and other recreational facilities, airports, highways, hospitals, schools, land subdivisions, and commercial, industrial, and residential sites. There are several sections to the exam that assess candidates' knowledge, skills, and abilities in the areas of protecting public health, safety, and welfare. Candidates for the LARE credential must meet educational and experiential requirements.
Click here to go to Certified Construction Manager (CCM) COOL Snapshot page.

Renewal Period: 3 years

The Construction Manager Certification Institute (CMCI), Certified Construction Manager (CCM) is an intermediate level certification. The CCM is aimed at construction professionals who manage entire projects and programs using pre-planning, design, construction, close out and management expertise. CCMs assure the best possible project outcome no matter what type of project delivery method is used. Candidates must meet experience and other requirements. Candidates must pass a written examination.
Click here to go to Fundamentals of Surveying (FS) Exam COOL Snapshot page.

Credential description coming soon.
Click here to go to Certified Safety Professional (CSP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Certified Safety Professional (CSP) is an intermediate-level credential for professionals who support workplace safety practices. CSPs conduct worksite assessments, determine risk, measure hazards and controls, evaluate risk and hazard control measures, investigate incidents, maintain incident and loss records, and prepare emergency response plans. CSP candidates must meet experiential requirements that relate to the field of workplace safety. Candidates must pass a written exam.
Click here to go to Advanced Concrete Flatwork Finisher COOL Snapshot page.

Renewal Period: 5 years

The American Concrete Institute (ACI), Advanced Concrete Flatwork Finisher (ACFF) certification is for candidates qualified to consolidate, finish, edge, joint, begin curing and provide initial protection for a concrete slab. Candidates must have Finishing experience including, concrete placement, consolidation, jointing, curing and protection, finishing, form setting, prep work, rubbing, patching, and saw cutting. Candidates must provide verification of work experience from employer. Candidates must pass a written exam.
Click here to go to Safety Trained Supervisor (STS) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Safety Trained Supervisor (STS) certification is an intermediate, managerial credential developed for professionals who demonstrate competency and work part-time or full-time in supervisory positions with tasks devoted to the prevention of harm to individuals in the workplace environment. The STS is often sought by safety professionals who are first-line supervisors and managers. STS applicants must have expertise in monitoring worksites for job hazards, helping to ensure regulatory compliance occurs, training employees in safety practices, performing safety-related record keeping, coordinating corrections for safety problems within or among work groups, and communicating with safety specialists or management. Applicants must pass a written examination.
Click here to go to Shotcrete Nozzleman (Dry-Mix Process) COOL Snapshot page.

Renewal Period: 5 years

The American Concrete Institute (ACI), Shotcrete Nozzleman (Dry-Mix Process) certification is for individuals who have demonstrated knowledge of the dry-mix shotcrete process and the ability to properly place dry-mix shotcrete. Candidates must meet work experience requirements to be eligible for the certification exam. Candidates must pass a written and performance examination.
Click here to go to Shotcrete Nozzleman (Wet-Mix Process) COOL Snapshot page.

A Shotcrete Nozzleman (Wet-Mix Process) is an individual who has demonstrated the knowledge and ability to properly place wet-mix shotcrete. No specific education is required as a prerequisite for Shotcrete Nozzleman certification; however, 500 hours of verified work experience as a nozzleman or nozzleman-in-training is a prerequisite to participate in the written or performance examinations. Candidates must achieve a passing grade on the written examination and successfully complete the performance examination.
Click here to go to Concrete Laboratory Testing Technician - Level 1 COOL Snapshot page.

Renewal Period: 5 years

American Concrete Institute (ACI), Concrete Laboratory Testing Technician-Level 1 credential demonstrates an individual's knowledge and ability to properly perform, record, and report the results of a variety of laboratory procedures for concrete and aggregates. There is no actual examination or application process for this certification. Certification credentials will be automatically issued upon successfully obtaining concurrent certifications as both Concrete Strength Testing Technician and Aggregate Testing Technician-Level 1.
Click here to go to Commercial Electrical Inspector - E2 COOL Snapshot page.

Renewal Period: 3 years

The International Code Council (ICC), Commercial Electrical Inspector - E2 certification is for professionals who inspect the installation or alteration of electrical systems. Commercial Electrical Inspectors are expected to have the skills and knowledge necessary to assess the compliance with code and safety of indoor and outdoor electrical services, conductors, equipment, components, fixtures, appliances, devices, and electrical appurtenances for all types of buildings and structures, both commercial and industrial, with no limit as to voltage or amperage. There are no experience or education pre-requisites that must be met; however, individuals seeking the Commercial Electrical Inspector certification should have technical knowledge and related experience in their chosen field of expertise. Candidates must pass a written exam. 

Click here to go to Concrete Laboratory Testing Technician - Level 2 COOL Snapshot page.

A Concrete Laboratory Testing Technician-Level 2 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of advanced laboratory procedures for aggregates and concrete. Candidates must have at least one year (2000 hours) of approved work experience or a combination of work experience and education as well as hold current certification as an ACI Concrete Laboratory Testing Technician-Level 1 and obtain a passing grade on the written examination and the performance examination.
Click here to go to PV Installation Professional COOL Snapshot page.

Renewal Period: 3 years

The North American Board of Certified Energy Practitioners (NABCEP), PV Installation Professional certification is a mid-level credential that is applicable to a wide range of installation personnel including installers, project managers, installation foremen/supervisors, and designers.  A certified PV Installation Professional specifies, configures, adapts, installs, implements, inspects, and maintains photovoltaic systems, including grid-connected and stand-alone systems by incorporating quality craftsmanship and complying with all applicable standards, codes, and safety requirements. Candidates must meet a combination of education and experience requirements. Candidates must pass a written exam.
Click here to go to Associate Safety Professional (ASP) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Associate Safety Professional (ASP) certification validates an individual's knowledge and experience in the safety profession. ASP certifies an individual's ability to perform at least 50% of professional-level safety duties in safety, health, environment, and ergonomics. Safety professionals are required to make worksite assessments to determine risks, potential hazards and controls, evaluate risks and hazard control measures for equipment, systems, facilities, and processes, investigate incidents, maintain and evaluate incident and loss records, and prepare emergency response plans. ASP candidates must meet a combination of education and experience requirements. Candidates must take a written exam.
Click here to go to Aggregate/Soils Base Testing Technician COOL Snapshot page.

Renewal Period: 5 years

The American Concrete Institute (ACI), Aggregate/Soils Base Testing Technician is for candidates who have demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates and soils. The Aggregate/Soils Base Testing Technician is an entry-level certification designed to form a minimum qualification for personnel employed within the concrete construction industry. Candidates must receive a passing grade on the ACI written examination and successfully complete the ACI performance examination.
Click here to go to Crawler Mount Crane, Lattice Boom, Friction Machinery COOL Snapshot page.

Renewal Period: 5 years

The National Center for Construction Education and Research (NCCER), Crawler Mount Crane, Lattice Boom, Friction Machinery credential improves the practice and profession of mobile crane operation through validated and reliable certification instruments, to enhance competency and a safer work environment. Lattice boom crane operators are required to know the appropriate rules and regulations, machine conditions, operational limitations, load limitations and be able to conduct all hoisting operations in a safe manner. Operators effectively communicate with signal persons, riggers and other site hoisting operations personnel. There are no minimum requirements for this certification. Candidates must pass both a practical and a written exam.

Click here to go to Crawler Mount Crane, Lattice Boom, Hydraulic Machinery COOL Snapshot page.

Renewal Period: 5 years

The National Center for Construction Education and Research (NCCER), Crawler Mount Crane, Lattice Boom, Hydraulic Machinery credential improves the practice and profession of mobile crane operation through validated and reliable certification instruments, to enhance competency and a safer work environment. Lattice boom crane operators are required to know the appropriate rules and regulations, machine conditions, operational limitations, load limitations and be able to conduct all hoisting operations in a safe manner. Operators effectively communicate with signal persons, riggers and other site hoisting operations personnel. There are no minimum requirements for this certification. Candidates must pass both a practical and a written exam.

Click here to go to Industrial/All Purpose Crane COOL Snapshot page.

Renewal Period: 5 years

The National Center for Construction Education and Research (NCCER), Industrial/All Purpose Crane credential improves the practice and profession of mobile crane operation through validated and reliable certification instruments, to enhance competency and a safer work environment. Industrial/All Purpose crane operators are required to know the appropriate rules and regulations, machine conditions, operational limitations, load limitations and be able to conduct all hoisting operations in a safe manner. Operators effectively communicate with signal persons, riggers and other site hoisting operations personnel. There are no minimum requirements for this certification. Candidates must pass both a practical and a written exam.
Click here to go to Crawler Mount Crane, Telescopic Boom COOL Snapshot page.

Renewal Period: 5 years

The National Center for Construction Education and Research (NCCER), Crawler Mount Crane, Telescopic Boom credential improves the practice and profession of mobile crane operation through validated and reliable certification instruments, to enhance competency and a safer work environment. Telescopic boom crane operators are required to know the appropriate rules and regulations, machine conditions, operational limitations, load limitations and be able to conduct all hoisting operations in a safe manner. Operators effectively communicate with signal persons, riggers and other site hoisting operations personnel. There are no minimum requirements for this certification. Candidates must pass both a practical and a written exam.

Click here to go to Boom Truck Fixed Cab Operator COOL Snapshot page.

Renewal Period: 5 years

The National Commission for the Certification of Crane Operators (NCCCO), Boom Truck Fixed Cab Operator (BTF) certification attests to the knowledge and proficiency required for the safe operation of cranes. The Boom Truck—Fixed Cab Operator certification is a subcategory of the CCO Telescopic Boom—Fixed Cab (TSS) certification and was developed specifically for the industries that use these machines. Boom Truck Fixed Cab Operators lift, lower, and swing loads at various radii, requiring the use of outriggers/stabilizers. Candidates must pass a practical and written exam.
Click here to go to Service Truck Crane Operator COOL Snapshot page.

Renewal Period: 5 years

The National Commission for the Certification of Crane Operators (NCCCO), Service Truck Crane Operator (STC) certification validates a crane operator’s skills. Service truck cranes are a subcategory of the Telescopic Boom-Fixed Cab (TSS) certification and typically have shorter boom lengths and lower capacities and functions are typically accomplished via a winch. The Telescopic Boom – Fixed Cab Operator (TSS) and Boom Truck –Fixed Cab (BTF) certifications cover service truck cranes. Service Truck Crane Operators who currently hold a TSS or BTF certification are not required to also hold the Service Truck Crane Operator certification. Other candidates must pass a written and a practical exam.
Click here to go to Saturation Technician COOL Snapshot page.

Credential description coming soon.
Click here to go to Safety Trained Supervisor Construction (STSC) COOL Snapshot page.

Renewal Period: 5 years

The Board of Certified Safety Professionals (BCSP), Safety Trained Supervisor Construction (STSC) credential is intended for construction supervisors, managers, superintendents, forepersons, crew chiefs, and craftspeople who have safety responsibilities on construction job sites. Candidates must have knowledge of safety standards and practices which ensure safe worksites. STSC candidates must meet minimum education and experience requirements. Candidates must pass a written exam.
Click here to go to Principles and Practice of Engineering (PE) Exam - Architectural Engineering COOL Snapshot page.

The National Council of Examiners for Engineering and Surveying (NCEES), Principles and Practice of Engineering (PE) Exam - Architectural Engineering tests for a minimum level of competency in architectural engineering. It is designed for engineers who have gained a minimum of four years of post-college work experience in the discipline. Eligibility to sit for the exam varies and is determined by each licensing board.
Click here to go to Principles and Practice of Engineering (PE) Exam - Civil COOL Snapshot page.

The National Council of Examiners for Engineering and Surveying (NCEES), Principles and Practice of Engineering (PE) Exam - Civil tests for a minimum level of competency in civil engineering. It is designed for engineers who have gained a minimum of four years of post-college work experience in the discipline. Eligibility to sit for the exam varies and is determined by each licensing board.

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Civil Engineering Technicians
Click here for the external link to: My Next Move salary info for Civil Engineering Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Civil Engineering Technicians

Click here for the external link to: My Next Move for Veterans - Construction and Building Inspectors
Click here for the external link to: My Next Move salary info for Construction and Building Inspectors

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Construction and Building Inspectors

Click here for the external link to: My Next Move for Veterans - Construction Managers
Click here for the external link to: My Next Move salary info for Construction Managers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Construction Managers

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Construction Trades and Extraction Workers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Construction Trades and Extraction Workers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Construction Trades and Extraction Workers

Click here for the external link to: My Next Move for Veterans - General and Operations Managers
Click here for the external link to: My Next Move salary info for General and Operations Managers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for General and Operations Managers

Click here for the external link to: My Next Move for Veterans - Industrial Safety and Health Engineers
Click here for the external link to: My Next Move salary info for Industrial Safety and Health Engineers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Industrial Safety and Health Engineers

Click here for the external link to: My Next Move for Veterans - Mapping Technicians
Click here for the external link to: My Next Move salary info for Mapping Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Mapping Technicians

Click here for the external link to: My Next Move for Veterans - Operating Engineers and Other Construction Equipment Operators
Click here for the external link to: My Next Move salary info for Operating Engineers and Other Construction Equipment Operators

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Operating Engineers and Other Construction Equipment Operators

This credential has been accredited by:
This credential has been accredited by: